Here's the other side ( DC low )..terriblefire wrote: Mon Aug 17, 2020 10:21 am Opened up mine..
Mains side the main smoothing cap is a 400V 33uF
The one thats gone fishy is a 10V 1000uF cap.
a500 PSU caps
Moderators: terriblefire, Terriblefire Moderator
Re: a500 PSU caps
-
terriblefire
- Admin sponsor

- Posts: 5687
- Joined: Mon Aug 28, 2017 10:56 pm
- Location: Glasgow, UK
Re: a500 PSU caps
I'm not a fan of the chineseium caps they use in those.Steve wrote: Mon Aug 17, 2020 11:15 am I would recommend just replacing the entire board with a Meanwell PSU. Just jump on YouTube and type 'meanwell amiga' and you'll see lots of guides. (I did this myself, they're really great)
———
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
Re: a500 PSU caps
Done that on someone elses and was a nice easy mod, but wanting to get this working so can pass on the whole thing..Steve wrote: Mon Aug 17, 2020 11:15 am I would recommend just replacing the entire board with a Meanwell PSU. Just jump on YouTube and type 'meanwell amiga' and you'll see lots of guides. (I did this myself, they're really great)
Re: a500 PSU caps
All ordered, had to order 2200uF 50v instead of 40v, but should be fine..
the princely sum of £11.00 from Farnell ....
Could be another Amiga Power supply rising from the dead !
the princely sum of £11.00 from Farnell ....
Could be another Amiga Power supply rising from the dead !
Re: a500 PSU caps
I must have been lucky cause mine had Nichicon inside, unless they were fakes 
Re: a500 PSU caps
They arrived and installed them this morning, it's alive ( and no fishy smell )..
And the Amiga that I got with it, ( seals intact ) seems to work, but I don't have the wire for the 520
so unsure about video, but the lights work and the drive does the appropriate clicky seeking type noise... Very Happy
And the Amiga that I got with it, ( seals intact ) seems to work, but I don't have the wire for the 520
Re: a500 PSU caps
For a test could you not use the mono composite video out instead?maeltar wrote: Thu Aug 20, 2020 8:58 am but I don't have the wire for the 520so unsure about video, but the lights work and the drive does the appropriate clicky seeking type noise... Very Happy
Just remembered the A520 does colour composite out too, might be a option with modern TVs, I guess RF is no more
Hated them A520 modulators they always seemed to blow up on me
Re: a500 PSU caps
Good call sir !!!!DrF wrote: Thu Aug 20, 2020 10:15 am
For a test could you not use the mono composite video out instead?
Just remembered the A520 does colour composite out too, might be a option with modern TVs, I guess RF is no more
Hated them A520 modulators they always seemed to blow up on me![]()
Will give that a go later and see what happens..
Re: a500 PSU caps
TaDaaaa Very happy, it's aliveDrF wrote: Thu Aug 20, 2020 10:15 am For a test could you not use the mono composite video out instead?
Just remembered the A520 does colour composite out too, might be a option with modern TVs, I guess RF is no more
Hated them A520 modulators they always seemed to blow up on me![]()
Now to try and source WB disks etc..
Re: a500 PSU caps
Now that's awesome, looks shockingly clear too
My A500+ mono out looked like crap, whoever's idea that was adding that well....
My A500+ mono out looked like crap, whoever's idea that was adding that well....
