TF536 Bulk Order Batch 4 (exxos run)

68030 + SDRAM + IDE

Moderators: terriblefire, Terriblefire Moderator

User avatar
exxos
Site Admin
Site Admin
Posts: 28617
Joined: Wed Aug 16, 2017 11:19 pm
Location: UK
Contact:

Re: TF536 Bulk Order Batch 4 (exxos run)

Post by exxos »

adam wrote: Mon Jul 13, 2020 7:09 pm Are you talking about missing RN from the PCB in the middle?
No.. it was a joke...

The missing RN board didn't get sold in the store anyway.
User avatar
exxos
Site Admin
Site Admin
Posts: 28617
Joined: Wed Aug 16, 2017 11:19 pm
Location: UK
Contact:

Re: TF536 Bulk Order Batch 4 (exxos run)

Post by exxos »

There seems to be a lot of confusion over my joke :roll:

Firstly, as mentioned already. There are no PCB quality issues with these boards. Aside from the one missing resistor pack which wasnt put into stock. I inspected each board twice before shipping and did not see any other missing parts. The joke wasn't related to the missing part, in fact it was totally unrelated as I did not even notice the missing part until after I did the post. I did not change the image as I thought nobody would even notice..

Secondly, it was in no way slating terriblefires boards in anyway. Sometimes I make the odd small joke to terrible fire and he does to me sometimes. His reply was he understood the joke.

All the joke was, was the fact that I am a Atari guy and selling "Amiga rubbish" . I of course am not looking to start another Atari vs Amiga war, I already wrote lots of times that I am strongly against such posts, but sometimes we joke about , as do others.

But unfortunately some people do take offence as they don't understand the "forum spirit". Long term users here all know its a joke and know how strongly I am against such "machine wars". But I now see such comments are misunderstood by some people.

So I apologize for any confusion it may have caused. It was more a personal joke to terrible fire than anything . I am of course grateful for him letting me sell his boards, as I am sure others are also. So far it has paid for my new large PCB oven and some other items I will buy soon. He has been very generous and expected nothing in return. I am also using a TF536 in one of my H4 motherboards, as are others.
terriblefire
Admin sponsor
Admin sponsor
Posts: 5687
Joined: Mon Aug 28, 2017 10:56 pm
Location: Glasgow, UK

Re: TF536 Bulk Order Batch 4 (exxos run)

Post by terriblefire »

I took it as banter.. which is how it should be taken.. And as a Scotsman who lives in Glasgow banter is a way of life. Everyone should get over it. Seriously if you're kicking at exxos for that banter you clearly need to call a doctor and get a sense of humour transplant done urgently.
———
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
User avatar
exxos
Site Admin
Site Admin
Posts: 28617
Joined: Wed Aug 16, 2017 11:19 pm
Location: UK
Contact:

Re: TF536 Bulk Order Batch 4 (exxos run)

Post by exxos »

Nobody is kicking off :) just some people are a bit confused what I was actually saying, so was just clarifying in case anyone else reads it :)
User avatar
JezC
Posts: 2815
Joined: Mon Aug 28, 2017 11:44 pm

Re: TF536 Bulk Order Batch 4 (exxos run)

Post by JezC »

I think an important point here is that both @exxos and @terriblefire have publicly stated no offence was meant or taken and an apology offered to any who took offence.

It's a good example of proper forum etiquette and is a good example for us all to follow!
User avatar
exxos
Site Admin
Site Admin
Posts: 28617
Joined: Wed Aug 16, 2017 11:19 pm
Location: UK
Contact:

Re: TF536 Bulk Order Batch 4 (exxos run)

Post by exxos »

Batch 4 is now SOLD OUT!

Thanks for everyone's orders!

I have started to a new thread to see if there is demand enough to do another run. https://www.exxosforum.co.uk/forum/viewt ... =76&t=3112
Locked

Return to “TF536”