Tf536 finished

[Subzero79]

Nice one tf

15936990077368071386617118144805.jpg (298.35 KiB) Viewed 4301 times

15936990077368071386617118144805.jpg (298.35 KiB) Viewed 4301 times

IMG_20200702_165228.jpg (207.59 KiB) Viewed 4301 times

IMG_20200702_165228.jpg (207.59 KiB) Viewed 4301 times

Build finished work ok

[kulamario]

so now time to do tests atleast 1-2 hours on each title
Doom , Nemac , Goom , Frontier
as well
Some demos you can test state of art have problems with graphics but not freeze

[terriblefire]

One of your address pins on the 68000 socket isnt soldered. A2 or A3 i think

[8 Bit Dreams]

Yeah, seems Subzero79 has tomatoes on his eyes
Right row, second pin ( Pin31) isn't soldered

[PhilC]

Yeah, seems Subzero79 has tomatoes on his eyes
Right row, second pin ( Pin31) isn't soldered

Nah, its one of those new friction fit headers.

I'm amazed its booted, still good first try Subzero, best get that pin soldered tho

[Subzero79]

Notice that andnsoldered A2 line the pins do contact underside

[PaulJ_2.0]

Why do you have that ram expansion board with gary adapter?
The 500+ only needs a cheap 1MB board to achieve 2MB chipmem.

[Subzero79]

Last time had ff 530 and need 1! Mb extra ranger ram

[terriblefire]

Last time had ff 530 and need 1! Mb extra ranger ram

I think whats being said is you dont need a ram expansion with a Gary adaptor on an A500+.

A basic 1Mb expansion will work without the Gary adaptor.

[Subzero79]

Removed gary adapter now runing long memory test

All seems ok cpld gets little warm .55 celsius im going yo use rasberry cooling solution
.nice work tf....