With the talk on another topic of IDE speeds and 2-4mb/s being achievable on CD32 I was wondering if the current TF360 firmware or a software setting is limiting me to 1.5mb/s?
This is with with the normal CF card as supplied by Mark with the beta TF360 Rev 2s and I also got the same speed on another CF I setup.
I have also noticed some strange behaviour on the demo 'Starstruck' by TBL (using Final version released in 2018). At 50Mhz there is glitching, this is first noticeable after the loading screen.
At 62 and 75 mhz glitches have gone. I thought usually a faster speed would make say 3d motion smoother, why would there be glitches at 50mhz? Anyone else got another 50mhz 060 system to check ? Chucky has a Warp
I will try to update with pics.Also this seems strange and it would be good for someone else to check, preferably on CRT to avoid any LCD processing: the first part of the demo has a scrolling multi parallax scene, to me the 2nd layer moves smoother at 62mhz compared to 75mhz. At 75mhz it seems to move in jumps.
Regarding the occasional crashing when using cpuspeed. It always freezes with about the last 2 lines of the cpuspeed command yet to appear when you make a clock speed adjustment (if that makes any sense). My mobile is always out of charge when it happens! This only happens occasionally and once on 75mhz it has been really good, I have watched hours of 060 demos now.
I just swapped out the 5mm tall CPLD heatsinks for some 20x20x16 ones. Doing this has guaranteed the UK will not see 30 degs again this summer
