smd fuses.

Tool suggestions, soldering tips, general useful electronics knowhow.
Post Reply
philbo34
Site sponsor
Site sponsor
Posts: 200
Joined: Tue Apr 21, 2020 10:46 am

smd fuses.

Post by philbo34 »

im struggling to find some ccp2e50te and ccp2e30te fuses
i usually use farnell but no joy .
found a place in spain but as i only want 1 of each seems expensive with postage .
cheers
User avatar
exxos
Site Admin
Site Admin
Posts: 28631
Joined: Wed Aug 16, 2017 11:19 pm
Location: UK
Contact:

Re: smd fuses.

Post by exxos »

What package and rating etc are they ?
philbo34
Site sponsor
Site sponsor
Posts: 200
Joined: Tue Apr 21, 2020 10:46 am

Re: smd fuses.

Post by philbo34 »

package size is 1210
2a and 1.2a
User avatar
exxos
Site Admin
Site Admin
Posts: 28631
Joined: Wed Aug 16, 2017 11:19 pm
Location: UK
Contact:

Re: smd fuses.

Post by exxos »

Those 2 number are list on evilbay...

Farnell sell various 2amps ones...

https://uk.farnell.com/search?st=1210%202a%20fuse

1.2A I cannot find, so you will have to use 1A or 1.5A.


Even so, CCP2E50TE lists as 5Amp on evilbay https://www.ebay.co.uk/i/172205248693?chn=ps

CCP2E30TE lists as 3A on evilbay https://www.ebay.co.uk/itm/10Pcs-KOA-CC ... 2679640825


Farnell list 3A and 5A, but 5amp no longer sold

https://uk.farnell.com/w/c/circuit-prot ... 210%20fuse


Mouser sell 5A versions.

https://www.mouser.co.uk/Circuit-Protec ... exZ1yzvlko
terriblefire
Admin sponsor
Admin sponsor
Posts: 5687
Joined: Mon Aug 28, 2017 10:56 pm
Location: Glasgow, UK

Re: smd fuses.

Post by terriblefire »

I use resetable fuses on my USB boards. RS have a good supply of them.
———
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
philbo34
Site sponsor
Site sponsor
Posts: 200
Joined: Tue Apr 21, 2020 10:46 am

Re: smd fuses.

Post by philbo34 »

Cheers for advice gents.
I have found another doc that shows they are the rating you mentioned.
I will double check the correct rating and go from there ...knew I should of left PS2 in cupboard
Post Reply

Return to “ELECTRONICS”