Ah i forgot that. Oh well.. I think a TV signal will be a good start.exxos wrote: Mon May 18, 2020 11:05 pm TOS206 and up has the logo, you can only use up to TOS104 on the STFU without a decoder board.
TerribleFire's H4 Build
-
terriblefire
- Admin sponsor
- Posts: 5687
- Joined: Mon Aug 28, 2017 10:56 pm
- Location: Glasgow, UK
Re: TerribleFire's H4 Build
———
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
Re: TerribleFire's H4 Build
There a RS232 mod to do as well... There's not many mods to do anyway..
-
terriblefire
- Admin sponsor
- Posts: 5687
- Joined: Mon Aug 28, 2017 10:56 pm
- Location: Glasgow, UK
Re: TerribleFire's H4 Build
That one might be a pain with the chips on now i look at it.exxos wrote: Tue May 19, 2020 12:02 am There a RS232 mod to do as well... There's not many mods to do anyway..
———
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
-
terriblefire
- Admin sponsor
- Posts: 5687
- Joined: Mon Aug 28, 2017 10:56 pm
- Location: Glasgow, UK
Re: TerribleFire's H4 Build
Built and booting. Blitter working and games running.
Few sockets to install like Midi but those are easymode
Few sockets to install like Midi but those are easymode
———
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
Re: TerribleFire's H4 Build
...And the disappointment of it booting up pretty much straight away , leaving you with nothing to do now
-
terriblefire
- Admin sponsor
- Posts: 5687
- Joined: Mon Aug 28, 2017 10:56 pm
- Location: Glasgow, UK
Re: TerribleFire's H4 Build
Yeah, it needs a case and a few minor things like a wash...exxos wrote: Tue May 19, 2020 10:49 pm ...And the disappointment of it booting up pretty much straight away , leaving you with nothing to do now
———
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
Re: TerribleFire's H4 Build
cases, who uses cases ?!terriblefire wrote: Tue May 19, 2020 10:50 pm Yeah, it needs a case and a few minor things like a wash...
-
terriblefire
- Admin sponsor
- Posts: 5687
- Joined: Mon Aug 28, 2017 10:56 pm
- Location: Glasgow, UK
Re: TerribleFire's H4 Build
I think with all those vertical mounted resistors it needs a case.
Could also do with a decoder for the ROM.
———
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
Re: TerribleFire's H4 Build
Second that! Would be nice with a decoder on the board.terriblefire wrote: Tue May 19, 2020 11:05 pmI think with all those vertical mounted resistors it needs a case.
Could also do with a decoder for the ROM.
Re: TerribleFire's H4 Build
The prototype H4 decoders are already in my store
