BBaN Mega ST expansion slot bracket

[PhilC]

Hi All,

Just finishing off this 3D printed support bracket for the BBaN HDD emulator for use inside the Mega ST.

To use it internally you'll need to acquire or make a Mega ST to UltraSatan adapter PCB and cable.

Here's some photos, STL file to follow shortly.

PXL_20260204_143847288.jpg (304.47 KiB) Viewed 53 times

PXL_20260204_143851989.jpg (408.31 KiB) Viewed 53 times

PXL_20260204_143906835.jpg (341.09 KiB) Viewed 53 times

PXL_20260204_144138717.jpg (297.37 KiB) Viewed 53 times

I printed it with clear resin simply because it was already in the printer. A side effect of this is that you can see the activity led working from behind the computer.

[exxos]

[PhilC]

And here's the .STL file as mentioned above.

BBAN Mega Bracket.stl

(20.79 KiB) Downloaded 1 time

I had to move a couple the holes just slightly, so they should be in the right place now.

[Steve]

Nice, that a resin print?

[PhilC]

Nice, that a resin print?

Yes it is, Water washable resin, doesn't need IPA to clean it and doesn't stink quite so much.(and it's quicker than FDM for smaller stuff.