H5 C5B Development Boards

[Icky]

This thread is to follow the process of building out 3x H5 C5B boards as development boards for @exxos, @ijor, and I.

I intend to blog as detailed as possible getting these boards working and in a state to accept the Phoenix Boards such as Phoenix BLUE, Phoenix MMU and Phoenix Shifter. Ultimately being a test bed of the Phoenix Nexus.

This won't be as easy as building up a board as normal as there will be desoldering and other tweaks. However, once complete the board will allow the plugging in and out of boards in a robust manner. For example we all know the turned pins used for some boards are very easily broken as we are looking at a more sturdy connectivity.

So, these arrived the other day and now I need to take stock of the end goal and where to start. Possibly with the warning note to rotate the amplifier IC first:

IMG_1550.png (1.69 MiB) Viewed 202 times

IMG_1551.png (1.58 MiB) Viewed 202 times

[Icky]

So these are going to be the areas of focus as I build out these boards:

• Desoldering
  - Desolder Amp chip and re-orientate
  - Desolder Shifter socket - for Phoenix Shifter testing
  - Desolder BLITTER / GLUE and MMU sockets - for Phoenix BLUE and MMU board testing
• Soldering
  - Oscillators
  - Reset Switch
  - 68K Sockets
  - HD headers
  - Power headers
  - 3V3 header
  - Misc signal header taps and the snip of the key pin in the keyboard header
  - Header sockets for PLCC chip locations
  - Edge connectors - MIDI, Cart, Printer etc.

I'll be documenting and providing detailed pictures as I go. Some of these steps may help builders of a non-dev H5 C5B board.

[Icky]

So removal of the audio chip using a heat gun:

IMG_1573 (1).png (1.35 MiB) Viewed 67 times

Audio chip oriented correctly and Shifter socket removed (not required if building a normal board)

IMG_1601.png (853.19 KiB) Viewed 67 times