You will not be able to post if you are still using Microsoft email addresses such as Hotmail etc
See here for more information viewtopic.php?f=20&t=7296
DO NOT USE MOBILE / CGNAT DEVICES WHERE THE IP CHANGES CONSTANTLY!
At this time, it is unfortunately not possible to whitelist users when your IP changes constantly.
You may inadvertently get banned because a previous attack may have used the IP you are now on.
So I suggest people only use fixed IP address devices until I can think of a solution for this problem!

SpeedyTT, black screen of death !!!! HELP

Problems with your machine in general.
Post Reply
User avatar
stephen_usher
Site sponsor
Site sponsor
Posts: 7140
Joined: Mon Nov 13, 2017 7:19 pm
Location: Oxford, UK.
Contact:
Contact stephen_usher

Re: SpeedyTT, black screen of death !!!! HELP

Post by stephen_usher »

:dualthumbup: :cheer:
Intro retro computers since before they were retro...
ZX81->Spectrum->Memotech MTX->Sinclair QL->520STM->BBC Micro->TT030->PCs & Sun Workstations.
Added code to the MiNT kernel (still there the last time I checked) + put together MiNTOS.
Collection now with added Macs, Amigas, Suns and Acorns.
Top
User avatar
HigashiJun
Posts: 2170
Joined: Fri Jun 19, 2020 7:21 am
Location: Tokyo

Re: SpeedyTT, black screen of death !!!! HELP

Post by HigashiJun »

It could have been worse...

Glad you managed to fix the issue.

8-)
Top
zfrenchy
Posts: 96
Joined: Sun Jan 15, 2023 6:14 pm
Location: California, USA

Re: SpeedyTT, black screen of death !!!! (SOLVED)

Post by zfrenchy »

final and summarized post:

Bad soldering joint on the IC sockets
ZuluSCSI-RP2040 is blocking the booting sequence after the RAM test when the SpeedyTT is in 48Mhz mode.
Top
User avatar
HigashiJun
Posts: 2170
Joined: Fri Jun 19, 2020 7:21 am
Location: Tokyo

Re: SpeedyTT, black screen of death !!!! (SOLVED)

Post by HigashiJun »

zfrenchy wrote: Sun Jan 18, 2026 1:56 am final and summarized post:

Bad soldering joint on the IC sockets
ZuluSCSI-RP2040 is blocking the booting sequence after the RAM test when the SpeedyTT is in 48Mhz mode.
:dizzy:

I'm afraid I don't understand you...

So does your Speedy work fine after all your fixes ?

What other expansions have you fitted in your TT ?

Do everything just work as it should without your SCSI interface ?
Top
zfrenchy
Posts: 96
Joined: Sun Jan 15, 2023 6:14 pm
Location: California, USA

Re: SpeedyTT, black screen of death !!!! HELP

Post by zfrenchy »

Yes, everything work without the ZuluSCSI installed
Top
User avatar
HigashiJun
Posts: 2170
Joined: Fri Jun 19, 2020 7:21 am
Location: Tokyo

Re: SpeedyTT, black screen of death !!!! HELP

Post by HigashiJun »

And don't you have an IDE drive (provided you got a Thunder IDE from the ThunderStorm team) ?
Top
zfrenchy
Posts: 96
Joined: Sun Jan 15, 2023 6:14 pm
Location: California, USA

Re: SpeedyTT, black screen of death !!!! HELP

Post by zfrenchy »

Yes I have it, not installed yet.
Top
User avatar
HigashiJun
Posts: 2170
Joined: Fri Jun 19, 2020 7:21 am
Location: Tokyo

Re: SpeedyTT, black screen of death !!!! HELP

Post by HigashiJun »

Then fit it and check if IDE works.
Top
Steve
Posts: 3245
Joined: Fri Sep 15, 2017 11:49 am

Re: SpeedyTT, black screen of death !!!! HELP

Post by Steve »

FYI that's most likely a software issue (zulu not working) I have TT, Speedy, both my IDE and SCSI work fine (I use a Bluescsi)
Top
User avatar
HigashiJun
Posts: 2170
Joined: Fri Jun 19, 2020 7:21 am
Location: Tokyo

Re: SpeedyTT, black screen of death !!!! HELP

Post by HigashiJun »

Steve wrote: Sun Jan 18, 2026 12:38 pm I have TT, Speedy, both my IDE and SCSI work fine (I use a Bluescsi)
Same here.
Top
Post Reply

Return to “HARDWARE ISSUES”