You will not be able to post if you are still using Microsoft email addresses such as Hotmail etc
See here for more information viewtopic.php?f=20&t=7296
DO NOT USE MOBILE / CGNAT DEVICES WHERE THE IP CHANGES CONSTANTLY!
At this time, it is unfortunately not possible to whitelist users when your IP changes constantly.
You may inadvertently get banned because a previous attack may have used the IP you are now on.
So I suggest people only use fixed IP address devices until I can think of a solution for this problem!

POV C5B build - Cyber Legends board

All related information and builds for the 2025 edition.
Post Reply
User avatar
exxos
Site Admin
Site Admin
Posts: 27550
Joined: Wed Aug 16, 2017 11:19 pm
Location: UK
Contact:
Contact exxos

Re: POV C5B build - Cyber Legends board

Post by exxos »

coonsgm wrote: Wed Dec 31, 2025 9:06 pm They offered me a $30 PCBWay credit towards a future purchase...

Told them "no thanks".
Thats pretty bad customer service :(

JLC have done good prints so far for me. But not used FDM printing.

JLC printed these in metal, very impressive !

viewtopic.php?p=107075#p107075
Top
coonsgm
Posts: 432
Joined: Sat Jan 30, 2021 1:30 am

Re: POV C5B build - Cyber Legends board

Post by coonsgm »

I should have ordered the print in resin. I just didn't think FDM would end up as badly as it did.
Top
coonsgm
Posts: 432
Joined: Sat Jan 30, 2021 1:30 am

Re: POV C5B build - Cyber Legends board

Post by coonsgm »

I'm cautiously optimistic.

After telling PCBWay "no" twice for $33 and $40 of store credit and that I'm only interested in a replacement print, resin if that is what they recommend for better print quality they just asked me to place an order that they will cover.

We'll see....I am cautiously optimistic.
Top
Post Reply

Return to “H5 C5B USER BUILDS”