You will not be able to post if you are still using Microsoft email addresses such as Hotmail etc
See here for more information viewtopic.php?f=20&t=7296
DO NOT USE MOBILE / CGNAT DEVICES WHERE THE IP CHANGES CONSTANTLY!
At this time, it is unfortunately not possible to whitelist users when your IP changes constantly.
You may inadvertently get banned because a previous attack may have used the IP you are now on.
So I suggest people only use fixed IP address devices until I can think of a solution for this problem!
I am building a kit for a friend who bought the SMT boards of the STEVE’S MS-22 DUAL VCF MODULE from Three Tom Modular and then realised SMT is not as easy as through hole soldering.
The MS-22 is a dual voltage controlled filter, inspired by the classic Korg MS-20 filter, with an innovative modulation matrix and one of the highest function-to-hp ratios in the land of Eurorack.
fullsizeoutput_30a8-1080x1080.jpeg (284.84 KiB) Viewed 19436 times
Finally got some time to do some SMD work on this, the third board. I have forgotten how time consuming and annoying SMD work is even with all the right equipment. It’s almost been a year since I touched it last.
IMG_3376.png (425.11 KiB) Viewed 16610 times
IMG_3377 (1).png (595.15 KiB) Viewed 16610 times
One more board to go but I dont think I can muster the enthusiasm to do it today.
Yeah, SMD stuff is a huge pain, even if you're able to do it and have good equipment. Looking good, fingers crossed you can muster a bit of enthusiasm for that last board
Collector of many retro things!
800XL and 65XE both with Ultimate1MB,VBXL/XE & PokeyMax, SIDE3, SDrive Max, 2x 1010 cassette, 2x 1050 one with Happy mod, 3x 2600 Jr, 7800 and Lynx II
Approx 20 STs, including a 520 STM, 520 STFMs, 3x Mega ST, MSTE & 2x 32 Mhz boosted STEs
Plus the rest, totalling around 50 machines including a QL, 3x BBC Model B, Electron, Spectrums, ZX81 etc...
rubber_jonnie wrote: Tue Dec 26, 2023 3:25 pm
Yeah, SMD stuff is a huge pain, even if you're able to do it and have good equipment. Looking good, fingers crossed you can muster a bit of enthusiasm for that last board
Thanks, I may give the final board a go today. Its going to be interesting as I will have to test the module works so will have to learn a bit of modular VCF
rubber_jonnie wrote: Tue Dec 26, 2023 3:25 pm
Yeah, SMD stuff is a huge pain, even if you're able to do it and have good equipment. Looking good, fingers crossed you can muster a bit of enthusiasm for that last board
Thanks, I may give the final board a go today. Its going to be interesting as I will have to test the module works so will have to learn a bit of modular VCF
Good luck, I'm sure it'll work first time with your skills
Collector of many retro things!
800XL and 65XE both with Ultimate1MB,VBXL/XE & PokeyMax, SIDE3, SDrive Max, 2x 1010 cassette, 2x 1050 one with Happy mod, 3x 2600 Jr, 7800 and Lynx II
Approx 20 STs, including a 520 STM, 520 STFMs, 3x Mega ST, MSTE & 2x 32 Mhz boosted STEs
Plus the rest, totalling around 50 machines including a QL, 3x BBC Model B, Electron, Spectrums, ZX81 etc...
I finally finished the last board of this module yesterday that's 3 years since I started. Just goes to show how life and a bit of health issues get in the way. I just need to figure out how to power this up and test as it normally plugs into a backplane board and case.
