POV C5B build - Cyber Legends board

[coonsgm]

Finally had some free time here with the whole turkey day weekend. I got my new C5B board up and running. Got the amp fixed, added all the needed components and first boot with a floppy disk demanded I load Ultima IV.

I wanted to try a VGA connector this time on the board and use the 3.5mm port for audio. External Floppy and cartridge port working just fine. I'm getting some new midi ports to solder on in the next few days.

IMG_3895.jpeg (361.55 KiB) Viewed 136 times

[coonsgm]

A PCBWay 3D printed case is coming my way to go with this....curse those tariffs! That added over $100....

[exxos]

[greendaleobs]

A PCBWay 3D printed case is coming my way to go with this....curse those tariffs! That added over $100....

any info on this case

I'm still on the fence to build a board - hard to find working 1040 ST's here in New Zealand - I was thinking a Phoenix might be a better option for the money

I have a 3D printer if the STL's are available

thanks

Simon

[coonsgm]

A PCBWay 3D printed case is coming my way to go with this....curse those tariffs! That added over $100....

any info on this case

I'm still on the fence to build a board - hard to find working 1040 ST's here in New Zealand - I was thinking a Phoenix might be a better option for the money

I have a 3D printer if the STL's are available

thanks

Simon

See here: https://www.printables.com/model/112784 ... hell/files

[greendaleobs]

any info on this case

I'm still on the fence to build a board - hard to find working 1040 ST's here in New Zealand - I was thinking a Phoenix might be a better option for the money

I have a 3D printer if the STL's are available

thanks

Simon

See here: https://www.printables.com/model/112784 ... hell/files

Ohh you mentioned PCBway - I was a bit confused - got it ... printables!

[greendaleobs]

any info on this case

I'm still on the fence to build a board - hard to find working 1040 ST's here in New Zealand - I was thinking a Phoenix might be a better option for the money

I have a 3D printer if the STL's are available

thanks

Simon

See here: https://www.printables.com/model/112784 ... hell/files

I might have a short term solution anyway as I just won an auction locally for a good looking but non functional 1040 STF and monitor

if the mainboard is not recoverable then at least I willl have the case ...ohhh and a mouse LOL