Gotek Q&A

[don_apple]

I know this is an old thread, but ive been trying to follow it to get my Gotek up and running. No matter what i try i cant get the gotek detected to program it.
Ive had it a while because i gave up on it way back in 2020 i think, i have time now and brought th project back out the attic and again i cannot get the damn thing to program
Ive tried it USB to USB, ive tried the USB to serial adaptor used in the guided on here. I even bought a 2nd gotek clone recently just incase it was faulty, but i cant even get this one programmed either. Im not a novice either, i have plenty experience modding consoles, and even jtagging old cable tv boxes from back in the day so im sure i am not just being daft. i even tried it on a win 7 PC a WINXP pc and also my newer win10/11 laptops
nothing works
checked the comm ports installed the ch340 driver and the dfu driver. but againnothing works

the original gotek is ARM CPU and the newer clone is a Artery CPU which i had to source the programming software for also

Has anyone else experienced issues like this. I hate being beat on a project lol but this is frustrating the hell out of me

any advice welcome

Calgacus

Have you seen https://github.com/keirf/flashfloppy/wi ... rogramming ?

This should provide all the information you need in case you want to get FlashFloppy installed on the Goteks.

If FlashFloppy is already installed, you can update it using the USB Stick: https://github.com/keirf/flashfloppy/wi ... are-Update

[Calgacus]

Hi Guys

Thanks for your replies

I replaced the TTl programmer and got the ST32 arm based gotek programmed first time.

I am still struggling with the Srtery based one. I cant find the artery programming software anywhere it doesnt
show up on Artery website anymore
Also can the Artery on be programmed with same TTL programmer or is tis one USB-USB only

Thanks

Calgacus

[rubber_jonnie]

Hi Guys

Thanks for your replies

I replaced the TTl programmer and got the ST32 arm based gotek programmed first time.

I am still struggling with the Srtery based one. I cant find the artery programming software anywhere it doesnt
show up on Artery website anymore
Also can the Artery on be programmed with same TTL programmer or is tis one USB-USB only

Thanks

Calgacus

Unfortunately I don't haver any Artery based drives so can't really advise.

[DoG]

You can find all the tools for Artery here. Pick the "ISP Programmer". I programmed a few this summer but I can't remember if I just used a usb or serial for it. But I think you need to install the USB driver in the package and then install and run the programmer. Follow the guide on FF site (The guide is NOT up to date since the program is a newer version).

[don_apple]

If you have a Linux system (for example a Raspberry Pi) it is pretty easy to user dfu-util to put FlashFloppy on an Artery-based Gotek: https://github.com/keirf/flashfloppy/di ... nt-3901428

[ijor]

Unfortunately I don't haver any Artery based drives so can't really advise.

I miss the old days when Goteks were STM32 based

[rubber_jonnie]

Unfortunately I don't haver any Artery based drives so can't really advise.

I miss the old days when Goteks were STM32 based

Couldn't even tell you what my latest ones are...

[Calgacus]

Thanks again guys

I will give this Atery one another go this eve with the software download link

Calgacus