Exxos's CL4 for sale list

[atarifreakz]

Is this including the STFM cases?

I see only 2 STE lids and the rest are STFM?

If it's £50 for all of them then ok I'll take them

OK just re read the listing, yes I'll take the lot for £50

[atarifreakz]

I'll also take the 80 scart cables

[exxos]

I'll also take the 80 scart cables

Going by your pm yesterday, I'm not sure you understand they are just scart to scart?

https://www.exxosforum.co.uk/atari/store2/#0274

I'm not selling off the RGB to scart cables, they were custom made and cost rather a lot.

[exxos]

Is this including the STFM cases?

I see only 2 STE lids and the rest are STFM?

If it's £50 for all of them then ok I'll take them

OK just re read the listing, yes I'll take the lot for £50

Yes all listed cases.

[atarifreakz]

OK I'll leave the scart cables but will take the ST cases job lot, thank you

[exxos]

I'd like 2 of the 2600 compatible joysticks please...still working on the other items from the usual store selection

Just realised these are PC USB 2600 style joysticks.. Not sure if you noticed ?

IMG_3767.JPG (339.47 KiB) Viewed 165 times

Also just removed some items and crossed out some other items as they have gone/sold.

[exxos]

I do have a old VGA projector. Looks like I paid $499.99 in 2007 for it. if anyone is interested in it, open to offers.. AFAIK it was working when last used some 10+ years ago now. Its not screwed together, but oh well ! Spares or repairs I guess..

I used to watch films on it in my bedroom, this was pre-girlfriend times The 12V PSU died, but I replaced that, it had a new bulb last time it was used... I think I put better fans in it but can't really remember anymore.

IMG_3806.JPG (299.28 KiB) Viewed 144 times

IMG_3807.JPG (309.24 KiB) Viewed 144 times

IMG_3808.JPG (289.27 KiB) Viewed 144 times

IMG_3809.JPG (218.99 KiB) Viewed 144 times

I do have 2x TRIPATH 2500 amps, Digital class T . 4U rack mount cases. Those amps cost £400 to make each. Custom made transformers as well!. I made the amps myself and wasn't used much as was prototypes really. Open to reasonable offers for both.. Really I just want them gone and to recover a bit of what they cost to make..

IMG_3804.JPG (240.99 KiB) Viewed 144 times

Some images of the internals...

DSCF0001.JPG (400.53 KiB) Viewed 144 times

DSCF0002.JPG (403.75 KiB) Viewed 144 times

amp.jpg (288.13 KiB) Viewed 144 times

psu.jpg (259.63 KiB) Viewed 144 times

The green PSU board I designed myself, soft start on the PSU rails. I believe they were +/-90VDC ! The amp will kick out full range (no 100Hz roll off rubbish) and push IIRC, ~ 800W true RMS per channel.

[JezC]

I'd like 2 of the 2600 compatible joysticks please...still working on the other items from the usual store selection

Just realised these are PC USB 2600 style joysticks.. Not sure if you noticed ?

Ah, dang...probably only worth me getting one of them then

[exxos]

Will start loading the van up tomorrow. Likely will take me most of the day as lots to move about. So last call for buying items now.

I'll only bring down stuff which has sold as not likely going to have much room otherwise.

[exxos]

Phase 1 done.

IMG_3811.JPG (327.29 KiB) Viewed 68 times