Can all registered uses please login, even just for a few minutes..
It helps build a picture where our "good traffic" is coming from..
Thanks :)

Exxos's B-roll blog of nothing in particular

Blogs & guides and tales of woo by forum members.
User avatar
exxos
Site Admin
Site Admin
Posts: 28669
Joined: Wed Aug 16, 2017 11:19 pm
Location: UK
Contact:

Re: Exxos's B-roll blog of nothing in particular

Post by exxos »

mrbombermillzy wrote: Mon Aug 25, 2025 6:30 pm Are you going to do the mod on this one?
Yeah probably.. its just getting around to it.. Need to do a couple month MPG tests as a baseline first though.. keep forgetting!
User avatar
exxos
Site Admin
Site Admin
Posts: 28669
Joined: Wed Aug 16, 2017 11:19 pm
Location: UK
Contact:

Re: Exxos's B-roll blog of nothing in particular

Post by exxos »

rubber_jonnie wrote: Mon Aug 25, 2025 6:32 pm Not sure your MPG will be anything half decent with an air filter like that...

Poor engine must be wheezing like a good un!!!
Yeah be interesting to see if it has a bit more power now...
User avatar
rubber_jonnie
Site Admin
Site Admin
Posts: 15066
Joined: Thu Aug 17, 2017 7:40 pm
Location: Essex
Contact:

Re: Exxos's B-roll blog of nothing in particular

Post by rubber_jonnie »

exxos wrote: Mon Aug 25, 2025 6:34 pm
rubber_jonnie wrote: Mon Aug 25, 2025 6:32 pm Not sure your MPG will be anything half decent with an air filter like that...

Poor engine must be wheezing like a good un!!!
Yeah be interesting to see if it has a bit more power now...
Updates are expected :)
Collector of many retro things!
800XL and 65XE both with Ultimate1MB,VBXL/XE & PokeyMax, SIDE3, SDrive Max, 2x 1010 cassette, 2x 1050 one with Happy mod, 3x 2600 Jr, 7800 and Lynx II
Approx 20 STs, including a 520 STM, 520 STFMs, 3x Mega ST, MSTE & 2x 32 Mhz boosted STEs
Plus the rest, totalling around 50 machines including a QL, 3x BBC Model B, Electron, Spectrums, ZX81 etc...
User avatar
exxos
Site Admin
Site Admin
Posts: 28669
Joined: Wed Aug 16, 2017 11:19 pm
Location: UK
Contact:

Re: Exxos's B-roll blog of nothing in particular

Post by exxos »

rubber_jonnie wrote: Mon Aug 25, 2025 6:42 pm Updates are expected :)
:2k2:
User avatar
exxos
Site Admin
Site Admin
Posts: 28669
Joined: Wed Aug 16, 2017 11:19 pm
Location: UK
Contact:

Re: Exxos's B-roll blog of nothing in particular

Post by exxos »

Sofa bed broke again :roll: Metal just so thin its stupid as its a support bar !

Bought a cheap MIG welder off evilbay. The old welder I have just isn't any good. So hope the new one will be easier to use.

I also have a block of wood under the frame now taking the weight. Will likely just leave the blocks there. So even if my welding is bad, which it probably will be, at least it should help stop the frame from twisting as much.


IMG_20250906_114950.jpg
IMG_20250906_114950.jpg (338.25 KiB) Viewed 1087 times

.. and yes, girlfriend is very messing dropping crumbs down the side of the sofa it seems!! :roll: I'm sure a few sparks from the arc welding will burn those right up though !
User avatar
PhilC
Moderator
Moderator
Posts: 7522
Joined: Fri Mar 23, 2018 8:22 pm

Re: Exxos's B-roll blog of nothing in particular

Post by PhilC »

Brings back memories of your welding if the office chair. Try not to set everything on fire :lol:
If it ain't broke, test it to Destruction.
User avatar
exxos
Site Admin
Site Admin
Posts: 28669
Joined: Wed Aug 16, 2017 11:19 pm
Location: UK
Contact:

Re: Exxos's B-roll blog of nothing in particular

Post by exxos »

PhilC wrote: Mon Sep 08, 2025 4:44 pm Brings back memories of your welding if the office chair. Try not to set everything on fire :lol:
:D Yeah my chair is still fine :)
User avatar
rubber_jonnie
Site Admin
Site Admin
Posts: 15066
Joined: Thu Aug 17, 2017 7:40 pm
Location: Essex
Contact:

Re: Exxos's B-roll blog of nothing in particular

Post by rubber_jonnie »

exxos wrote: Mon Sep 08, 2025 4:50 pm
PhilC wrote: Mon Sep 08, 2025 4:44 pm Brings back memories of your welding if the office chair. Try not to set everything on fire :lol:
:D Yeah my chair is still fine :)
Even if it is slightly scorched...


:fire1:
Collector of many retro things!
800XL and 65XE both with Ultimate1MB,VBXL/XE & PokeyMax, SIDE3, SDrive Max, 2x 1010 cassette, 2x 1050 one with Happy mod, 3x 2600 Jr, 7800 and Lynx II
Approx 20 STs, including a 520 STM, 520 STFMs, 3x Mega ST, MSTE & 2x 32 Mhz boosted STEs
Plus the rest, totalling around 50 machines including a QL, 3x BBC Model B, Electron, Spectrums, ZX81 etc...
User avatar
exxos
Site Admin
Site Admin
Posts: 28669
Joined: Wed Aug 16, 2017 11:19 pm
Location: UK
Contact:

Re: Exxos's B-roll blog of nothing in particular

Post by exxos »

Don't see many of these visiting the garden these days....

IMG_3645.JPG
IMG_3645.JPG (397.78 KiB) Viewed 1042 times
User avatar
PhilC
Moderator
Moderator
Posts: 7522
Joined: Fri Mar 23, 2018 8:22 pm

Re: Exxos's B-roll blog of nothing in particular

Post by PhilC »

Snap!
PXL_20250625_101755514.jpg
PXL_20250625_101755514.jpg (388.68 KiB) Viewed 1039 times
And better than one of these I spotted the other day.
PXL_20250809_100722840.jpg
PXL_20250809_100722840.jpg (342 KiB) Viewed 1039 times
If it ain't broke, test it to Destruction.
Post Reply

Return to “MEMBER BLOGS”