No, I don't have any boards. I got the two adapters from the German Atari forum. Ask Pakman. I'd have to create a layout in Eagle ...
Post it -> https://forum.atari-home.de/index.php/t ... #msg272677
The circuit boards are difficult to solder because you have to cut off the pins under the chips and solder them from below, which is difficult.
Can all registered uses please login, even just for a few minutes..
It helps build a picture where our "good traffic" is coming from..
Thanks :)
It helps build a picture where our "good traffic" is coming from..
Thanks :)
Building a PAK030
Re: Building a PAK030
It's possible I may have some. Is that the specific part number of the chip you require?bbisi wrote: Wed Jun 18, 2025 5:49 pm hallo Frank
Hast du noch solch eine Platine
bestücken würde ich mit meinen IDT71B74S20Y
Oder nur das Platinen Layout
Grüße
If it ain't broke, test it to Destruction.
-
frank.lukas
- Posts: 812
- Joined: Fri Jan 19, 2018 11:52 am
Re: Building a PAK030
https://github.com/zxshock/PAK68_tagram_soj-dilbbisi wrote: Wed Jun 18, 2025 5:49 pm hallo Frank
Hast du noch solch eine Platine
bestücken würde ich mit meinen IDT71B74S20Y
Oder nur das Platinen Layout
Grüße
Re: Building a PAK030
Danke für die Hilfe
Habe gerade 3 Stück aus China bestellt
Sollen übermorgen kommen
Gruß
Habe gerade 3 Stück aus China bestellt
Sollen übermorgen kommen
Gruß
Re: Building a PAK030
Danke für die Hilfe
Habe gerade 3 Tag Rams MK48S74N20 aus China bestellt
Sollen übermorgen kommen
Gruß
Habe gerade 3 Tag Rams MK48S74N20 aus China bestellt
Sollen übermorgen kommen
Gruß
Re: Building a PAK030
@bbisi Please note this is a English only forum thanks 
Re: Building a PAK030
Thanks for the help.
I just ordered 3 RAMs MK48S74N20 from China.
Should arrive the day after tomorrow.
Excuse me for German translation
I am not good in english
greetings
I just ordered 3 RAMs MK48S74N20 from China.
Should arrive the day after tomorrow.
Excuse me for German translation
I am not good in english
greetings