This sounds like a max transfer issue.
Do you get corruption on both the TF card IDE and motherboard IDE?
Can all registered uses please login, even just for a few minutes..
It helps build a picture where our "good traffic" is coming from..
Thanks :)
It helps build a picture where our "good traffic" is coming from..
Thanks :)
TF1230, KS3.2.2 with ehide, problems
Moderators: terriblefire, Terriblefire Moderator
-
terriblefire
- Admin sponsor

- Posts: 5687
- Joined: Mon Aug 28, 2017 10:56 pm
- Location: Glasgow, UK
Re: TF1230, KS3.2.2 with ehide, problems
———
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
Re: TF1230, KS3.2.2 with ehide, problems
First of all you must remove the two capacitors under the motherboard, E123C and E125C, this is recommended
Also I do not know what CF card amgaistore used but cheap chineesium ones will not work well or not at all, I always recommend a IDE to SD for the best experience
Also have you installed the MMU libs with MUfaststrom ?
the standard test to see if the timing fix is needed is to run the game `The Mad Professor Mariati " as this will crash early on if no timing fix has been done
I have a 16gb OS.3.2.2.1 hotfixed system that works on my TF1230 IDE, if you want to try that contact me
Also I do not know what CF card amgaistore used but cheap chineesium ones will not work well or not at all, I always recommend a IDE to SD for the best experience
Also have you installed the MMU libs with MUfaststrom ?
the standard test to see if the timing fix is needed is to run the game `The Mad Professor Mariati " as this will crash early on if no timing fix has been done
I have a 16gb OS.3.2.2.1 hotfixed system that works on my TF1230 IDE, if you want to try that contact me
Re: TF1230, KS3.2.2 with ehide, problems
I'm now running from motherboard and no any issues at all. Just scanning my whdload libary with TinyLauncher. Played some games and demos too without any problem. So the problem is only with the TF IDE.
Installed MMUlibs and put MuFastRom in startup-sequence but didn't try TF IDE after that anymore.
Played Mariati maybe 10 minutes and no problems.
Installed MMUlibs and put MuFastRom in startup-sequence but didn't try TF IDE after that anymore.
Played Mariati maybe 10 minutes and no problems.
-
terriblefire
- Admin sponsor

- Posts: 5687
- Joined: Mon Aug 28, 2017 10:56 pm
- Location: Glasgow, UK
Re: TF1230, KS3.2.2 with ehide, problems
Send the card back to whoever you bought it from for diagnositc. This shouldnt happen.
———
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
