This was added in on the current schematic.. But really as I am planning to adding buffers to place some other chips, I would assume the shifter MONO output is actually a digital one, and just switches between 0V & 5V ? So digital buffer should be okay here ?
This way we would save on there few parts not having to have basically a analogue buffer...
REMINDER - Stay logged in for at least 2 hours a week to get whitelisted.
Also it helps build a picture where our "good traffic" is coming from for detection scripts.
:o)
Also it helps build a picture where our "good traffic" is coming from for detection scripts.
:o)
MONO output buffer thoughts
-
exxos
- Site Admin
- Posts: 28608
- Joined: 16 Aug 2017 23:19
- Location: UK
MONO output buffer thoughts
You do not have the required permissions to view the files attached to this post.
-
czietz
- Posts: 587
- Joined: 14 Jan 2018 13:02
Re: MONO output buffer thoughts
The Shifter's MONO output is digital and TTL level, yes. The SM124's input is rated for nominally 1Vpp, though. This is why you have the divider R32/R33 and the emitter follower in the Atari ST.
-
exxos
- Site Admin
- Posts: 28608
- Joined: 16 Aug 2017 23:19
- Location: UK
Re: MONO output buffer thoughts
ah crap, thanks!
Who is online
Users browsing this forum: ClaudeBot and 2 guests