So I've got this sensor (link below) with a heat sensor cable that I won't be able to attach it to my 060 since I've got a heat sink and fan so I'm hoping I can just connect it to the THERM on my TF1260 ???
heat sensor
Can all registered uses please login, even just for a few minutes..
It helps build a picture where our "good traffic" is coming from..
Thanks :)
It helps build a picture where our "good traffic" is coming from..
Thanks :)
can I use THERM pins on my TF1260 ?
Moderators: terriblefire, Terriblefire Moderator
can I use THERM pins on my TF1260 ?
addicted to Amiga hardware for far too long 
-
terriblefire
- Admin sponsor
- Posts: 5687
- Joined: Mon Aug 28, 2017 10:56 pm
- Location: Glasgow, UK
Re: can I use THERM pins on my TF1260 ?
Yes. it's just a breakout for you
———
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
Re: can I use THERM pins on my TF1260 ?
great news
update:
just noticed the heat sensor cablehas 2 wires on it so which 2 to connect to the THERM on the TF1260
addicted to Amiga hardware for far too long
-
terriblefire
- Admin sponsor
- Posts: 5687
- Joined: Mon Aug 28, 2017 10:56 pm
- Location: Glasgow, UK
Re: can I use THERM pins on my TF1260 ?
That cable isn't for the THERM pins. It's it's own sensor
———
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
Re: can I use THERM pins on my TF1260 ?
Yes but I was hoping I can use this sensor connected to the THERM pins on my TF1260 since I can't mount the sensor onto the CPU itself as I have a heatsink and fan on top of the CPUterriblefire wrote: Mon May 13, 2024 1:51 pm That cable isn't for the THERM pins. It's it's own sensor
addicted to Amiga hardware for far too long
-
terriblefire
- Admin sponsor
- Posts: 5687
- Joined: Mon Aug 28, 2017 10:56 pm
- Location: Glasgow, UK
Re: can I use THERM pins on my TF1260 ?
The Therm pins are a sensor. All they are is a resistor that changes resistance with temperature. There isnt any kind of input into the the amiga that can read them. You need something like the solas board.f1lupo wrote: Mon May 13, 2024 7:54 pmYes but I was hoping I can use this sensor connected to the THERM pins on my TF1260 since I can't mount the sensor onto the CPU itself as I have a heatsink and fan on top of the CPUterriblefire wrote: Mon May 13, 2024 1:51 pm That cable isn't for the THERM pins. It's it's own sensor
———
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."