Fixing my C128D

[PhilC]

So the C128 remake boards are here and I've started to slowly assemble one of them. Slow being the operative word. <Let's just say I shouldn't be soldering at the mo.

So I have a whole load of chips to test ready for this new board and I decided I'd have another go at the stubborn C128 board. Well guess what, after linking and LA, getting the scope and the fluke out and suddenly I find out that the inverter on the AEC line has died. So swapped out the 7406 for a new one and:

IMG_2989.jpeg (305.89 KiB) Viewed 10039 times

[PhilC]

Obviously getting this fixed has boosted my confidence immensely when it comes to C128's as very little is properly documented on how they should work but I'd like to think that right now, if I had another to fix and diagnose I could likely do it with what I've learnt.

Word of advice for anyone thinking of fixing a C128, don't, unless you're feeling lucky

[stephen_usher]

[Maximilian]

Nicely done!!

[rubber_jonnie]

[mrbombermillzy]

Just logged in to say congrats on getting the C128 fully running at last Phil.

Hopefully you'll take care and ease up on the soldering jobs for a while.

[PhilC]

Just logged in to say congrats on getting the C128 fully running at last Phil.

Hopefully you'll take care and ease up on the soldering jobs for a while.

Thank you sir.

Want to buy a C128?

[rubber_jonnie]

Want to buy a C128?

I might

[PhilC]

Want to buy a C128?

I might

PM me when you get a chance and we can discuss it.

I'll post a photo of the board as it is now for reference.

[PhilC]

So here’s the board in all its fixed glory, or something like that.

IMG_2990.jpeg (830.87 KiB) Viewed 9138 times

I’d removed the RF and fitted an S video and 3.5 stereo jack board.

And then socketed and replaced some of the logic chips and replaced the 8502 and Z80. Replaced some of the roms but the originals can probably go back in as the replacements were for diagnostic purposes.