Okay, good to know. Thank you.
kodak80 H5 A3 builds
Re: kodak80 H5 A3 builds
Atari Falcon 030 | Atari 1040 STE | Atari 1040 STFM | Atari 1040 STF | Kryoflux & Supercard Pro Flux boards
Creator of the Atari ST Review magazine archive: https://www.chillichai.com/atari-st-review
Creator of the Atari ST Review magazine archive: https://www.chillichai.com/atari-st-review
Re: kodak80 H5 A3 builds
Okay, 3 years later and I have finally got back to looking at why this H5 A3 board was not booting. Turns out the fix on the reset IC22 was soldered to the GND pin 1 and not pin 2
The board is now booting and shows a desktop so another one comes to life.
Here is the correct location of the IC22 bodge wire:
I guess this means that my other three A3 boards should now be built up.
Atari Falcon 030 | Atari 1040 STE | Atari 1040 STFM | Atari 1040 STF | Kryoflux & Supercard Pro Flux boards
Creator of the Atari ST Review magazine archive: https://www.chillichai.com/atari-st-review
Creator of the Atari ST Review magazine archive: https://www.chillichai.com/atari-st-review