I have a firmware from around June/July 2020. I have had to twist the IDE-cable and generate an inverse INT-signal using a 74LS04 to get anything working on 192K EmuTOS in stock STacy ROM location and 256K in the Auto folder.
Everything is rock solid apart from ACSI and Floppy not working. TOS 2.06 or MagiC won't work.
EmuTOS + Geneva + Neodesk work great
EasyMiNT is also working great.
Yes, freezing when accessing floppy drive right after post.derkom wrote: ↑Wed Nov 25, 2020 10:42 amACSI is working fine on my Stacy + TF536 + CosmosEx setup, but I am using a tweaked firmware on the TF that disables IDE. I don't know that this should have anything to do with your problems, but perhaps.Atarian Computing wrote: ↑Mon Nov 23, 2020 7:08 pm ACSI won't work at all now.
TOS 2.06 refuses to boot now. It's freezing on accessing the drive.
As for your 2.06 problems, I don't have a clue. Since you say it's freezing accessing the drive, it would seem your 256K decode is working fine. Do you mean that it's freezing when accessing the floppy drive right after POST?
Are you certain you have no shorts under the relocator board (if you're using it, that is)? I've had to stick some cardboard under mine, although given your stability in EmuTOS, it wouldn't seem likely this is the problem (although perhaps it could be the ACSI problem).
No shorts. I have used various other locators or towers.
Why did you disable the IDE btw?
@derkom how did you program your TF? RPi or another programmer?