Neil's A500++ build

Post your daily progress & upgrade woos etc here.

Moderators: terriblefire, Terriblefire Moderator

neilo40
Posts: 36
Joined: Fri May 08, 2020 10:47 am

Neil's A500++ build

Post by neilo40 »

Thought I'd give myself something else to do during quarantine. I've only bought the easy bits so far (and a donor 500+) so if anyone has built one of these and has some tips, gotchas, or any recommendations for some of the harder to find bits (power socket, DB23, memory etc) please let me know.
canvas.png
canvas.png (2.29 MiB) Viewed 4915 times
terriblefire
Moderator Team
Moderator Team
Posts: 5368
Joined: Mon Aug 28, 2017 10:56 pm
Location: Glasgow, UK

Re: Neil's A500++ build

Post by terriblefire »

I have an A1k 500+ to build. A red one. But the parts they sent arent even labelled with the values. So i need to reorder the BOM and toss this lot in the bin.
———
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
neilo40
Posts: 36
Joined: Fri May 08, 2020 10:47 am

Re: Neil's A500++ build

Post by neilo40 »

That's like getting a jigsaw puzzle with no picture :D
neilo40
Posts: 36
Joined: Fri May 08, 2020 10:47 am

Re: Neil's A500++ build

Post by neilo40 »

Finally complete :D

Some notes / questions / thoughts. My main aim was to use as little from the donor as possible:
  • Most of the electrolytics are lying down to give clearance for boards etc
  • The battery is a NiMH from amigakit - are they any good or are they as likely to leak as the Varta? Should I replace with a coin cell?
  • The video hybrid is a vidiot - Rob Taylor sells them but I stupidly didn't get one at the same time as the main board so paid twice for shipping
  • The DB23 and power sockets are from icomp.de
  • I'll probably replace the Halo choke with a Laird as soon as they're back in stock
  • Memory, <sigh> Ordered 16 chips from Utsource hoping at least 8 would be good. Every single one was bad :roll:. I ended up desoldering and re-using the chips from my donor
Here's the board during its first successful run through diagrom:
500++_first_boot.png
500++_first_boot.png (1.2 MiB) Viewed 4833 times
And here it is with a TF536 in all its glory.
a500++_complete.png
a500++_complete.png (1.18 MiB) Viewed 4833 times
Anyway, it was relatively straightforward and good fun. I highly recommend giving it a go.

Neil
terriblefire
Moderator Team
Moderator Team
Posts: 5368
Joined: Mon Aug 28, 2017 10:56 pm
Location: Glasgow, UK

Re: Neil's A500++ build

Post by terriblefire »

I have an A1K 500+ but they sent me the parts unlabelled.

Do you have a mouser BOM for that? I think i'm gonna bin the parts they sent and reorder.
———
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
Aeberbach
Posts: 149
Joined: Mon Dec 16, 2019 10:24 pm

Re: Neil's A500++ build

Post by Aeberbach »

Uh what? You mean like a bunch of surface mount Rs and Cs with no way to know their value? That's ridiculous!
terriblefire
Moderator Team
Moderator Team
Posts: 5368
Joined: Mon Aug 28, 2017 10:56 pm
Location: Glasgow, UK

Re: Neil's A500++ build

Post by terriblefire »

Aeberbach wrote: Wed Jun 24, 2020 4:54 am Uh what? You mean like a bunch of surface mount Rs and Cs with no way to know their value? That's ridiculous!
No its a huge bag of through hole... but no markgings...

Even still i wanna re-order them from mouser with the board labels on them
———
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
neilo40
Posts: 36
Joined: Fri May 08, 2020 10:47 am

Re: Neil's A500++ build

Post by neilo40 »

This is the community BOM for the A500++: docs.google.com/spreadsheets/d/13xq2P7Ha_PA6r3vfPw77Q9PaSZYWncYfNpqhrwdvhaY

I've attached my mouser project in case it's any use. Should cover most of the parts. Most of them have board labels in the customer number field where I could fit it.
Project_Jun24_0524AM.zip
(16.56 KiB) Downloaded 178 times
terriblefire
Moderator Team
Moderator Team
Posts: 5368
Joined: Mon Aug 28, 2017 10:56 pm
Location: Glasgow, UK

Re: Neil's A500++ build

Post by terriblefire »

Thanks ... there are still a lot of unknown values..

I think this is my issue with the A500++/Ak500...

e.g.

660-MF1/4CCT52R1002F MF1/4CCT52R1002F KOA Speer Metal Film Resistors - Through Hole 10K 1% 50PPM

There are 11 of these but i have no idea where they go.
———
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
terriblefire
Moderator Team
Moderator Team
Posts: 5368
Joined: Mon Aug 28, 2017 10:56 pm
Location: Glasgow, UK

Re: Neil's A500++ build

Post by terriblefire »

terriblefire wrote: Wed Jun 24, 2020 12:03 pm Thanks ... there are still a lot of unknown values..

I think this is my issue with the A500++/Ak500...

e.g.

660-MF1/4CCT52R1002F MF1/4CCT52R1002F KOA Speer Metal Film Resistors - Through Hole 10K 1% 50PPM

There are 11 of these but i have no idea where they go.
Ah ok the community BOM works for me. i thought they were the same...

Maybe an Amiga build coming up then.
———
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
Post Reply

Return to “AMIGA MEMBER BLOGS”