It should still be the jumper on the mommy board. Trudie is only a decoder for 256K roms to another address (well, IDE as well of course ).
TRUDIE V5.2 (5 volt) pre-release install guide
Re: TRUDIE V5.2 (5 volt) pre-release install guide
Re: TRUDIE V5.2 (5 volt) pre-release install guide
@JezC No time to break things at the moment, feel free to steal my job
If it ain't broke, test it to Destruction.
Re: TRUDIE V5.2 (5 volt) pre-release install guide
Re: TRUDIE V5.2 (5 volt) pre-release install guide
Ok, moving the jumper didn't work first time... ...so after I removed it a second time (and found & removed the stray wire shorting the pins) it booted into the EmuCON command line.
Which shows it is now working...but that I have an EPROM in there with the custom EmuTOS floppy loader rather than TOS 2.06 or EmuTOS programmed into it.
So, job for later is to erase an EPROM & then program it up with TOS 2.06 (and maybe EmuTOS 256k after that)...
Re: TRUDIE V5.2 (5 volt) pre-release install guide
Managed to find & fix a previously undiscovered build problem with my assembled H4 without breaking it!
Now to see if I can change that EPROM for TOS 2.06 and/or EmuTOS...then get the TF536 you provided running in the H4 again...