Before I build the TF536 I am going to build a TF530.
I have most of the parts, I also have incorrect cpld XC9536XL10VQG44C.
I looked on RS and the correct ones are not stocked.
Where is the best place to purchase these at a reasonable price or if anyone has any left over that I could buy from them.
Finally going to build this board
Moderators: terriblefire, Terriblefire Moderator
Re: Fibnall going to build this board
Farnell, Mouser, DigiKey all have them in stock.
EDIT: Sorry. Searched for the part you listed above...
EDIT2: ...but the right part is also in stock when searched.
EDIT: Sorry. Searched for the part you listed above...
EDIT2: ...but the right part is also in stock when searched.
- 8 Bit Dreams
- Moderator Team
- Posts: 785
- Joined: Fri Nov 09, 2018 7:12 am
- Location: Germany
Re: Fibnall going to build this board
https://www.digikey.de/product-detail/d ... -ND/826991
or
https://www.mouser.de/ProductDetail/Xil ... 52BA%3D%3D
or
https://www.mouser.de/ProductDetail/Xil ... 52BA%3D%3D
Retro computer hardware & repair in Germany
Re: Fibnall going to build this board
8 Bit Dreams wrote: ↑Sun Jun 28, 2020 5:49 pm https://www.digikey.de/product-detail/d ... -ND/826991
or
https://www.mouser.de/ProductDetail/Xil ... 52BA%3D%3D
Thanks @DoG and @8 Bit Dreams
I had searched digi-key, but for such a small order the cost of delivery and service/vat charge by ups or fed ex is crazy.
I was hoping I could get them somewhere in the EU.
Re: Finally going to build this board
Have you tried uk.farnell.com ?
If it ain't broke, test it to Destruction.
Re: Finally going to build this board
Built the TF536 first very happy with it.
Now back to the TF530 I looked at the recommended ram for this build and it appears to be very expensive.
I have Alliance AS7C4096B-12T7CN I supose these will not be compatible?
Does anyone have extra ram they are noT using that I could purchase for a resonable price with post to Ireland?
Regards
Now back to the TF530 I looked at the recommended ram for this build and it appears to be very expensive.
I have Alliance AS7C4096B-12T7CN I supose these will not be compatible?
Does anyone have extra ram they are noT using that I could purchase for a resonable price with post to Ireland?
Regards
-
- Moderator Team
- Posts: 5389
- Joined: Mon Aug 28, 2017 10:56 pm
- Location: Glasgow, UK
Re: Finally going to build this board
I have not tried the alliance myself but they should work. If 5V.
This is the trouble with waiting to build designs. Prices of parts soar
This is the trouble with waiting to build designs. Prices of parts soar
———
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
Re: Finally going to build this board
Thanks I might try them first.
I bought the board from you about two yeasrs ago now but I was working away from home until recently so only getting round to building it now.
The TF536 is excellent thanks.
I bought the board from you about two yeasrs ago now but I was working away from home until recently so only getting round to building it now.
The TF536 is excellent thanks.