TFMSX rev1
Moderators: terriblefire, Terriblefire Moderator
Re: TFMSX rev1
As far as I know yes.
Do other Konami/Megarom carts work - Metal Gear?
Do other Konami/Megarom carts work - Metal Gear?
-
- Moderator Team
- Posts: 5389
- Joined: Mon Aug 28, 2017 10:56 pm
- Location: Glasgow, UK
Re: TFMSX rev1
I'll try F1 Spirit shortly.
———
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
-
- Moderator Team
- Posts: 5389
- Joined: Mon Aug 28, 2017 10:56 pm
- Location: Glasgow, UK
Re: TFMSX rev1
Yeah none of the later Konami games seems to work right now. One thing of note is that i'm not doing any /WAIT logic. I'm just leaving it high unless a Cart pulls it low. I wonder if this is perhaps part of the issue.
Otherwise i really need a keyboard so i can use the MSX Diagnositics cart to do things like ram tests.
Otherwise i really need a keyboard so i can use the MSX Diagnositics cart to do things like ram tests.
———
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
- arkadiusz.makarenko
- Moderator Team
- Posts: 1208
- Joined: Wed Jun 19, 2019 7:36 am
- Location: Edinburgh
Re: TFMSX rev1
I put some time today into firmware, I decided to implement only USB FS at this point (less points of failure).
I had some issues with ISR table. I had linker file defined and on sturtup copied table to ram from flash, forgot to let mpu where to look for it, so it jumped to random flash location when irq hit.
I now trying to figure out how to do mapping without tons of if statements for easier support.
I had some issues with ISR table. I had linker file defined and on sturtup copied table to ram from flash, forgot to let mpu where to look for it, so it jumped to random flash location when irq hit.
I now trying to figure out how to do mapping without tons of if statements for easier support.
Do not trust people. They are capable of greatness.
~ Stanislaw Lem
~ Stanislaw Lem
-
- Moderator Team
- Posts: 5389
- Joined: Mon Aug 28, 2017 10:56 pm
- Location: Glasgow, UK
Re: TFMSX rev1
Let me know if you need anything in terms of CPLD stuff.arkadiusz.makarenko wrote: ↑Fri Oct 29, 2021 8:46 pm I put some time today into firmware, I decided to implement only USB FS at this point (less points of failure).
I had some issues with ISR table. I had linker file defined and on sturtup copied table to ram from flash, forgot to let mpu where to look for it, so it jumped to random flash location when irq hit.
I now trying to figure out how to do mapping without tons of if statements for easier support.
———
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
-
- Moderator Team
- Posts: 5389
- Joined: Mon Aug 28, 2017 10:56 pm
- Location: Glasgow, UK
Re: TFMSX rev1
———
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
-
- Moderator Team
- Posts: 5389
- Joined: Mon Aug 28, 2017 10:56 pm
- Location: Glasgow, UK
Re: TFMSX rev1
Did a little on this this evening. Away from home on the flight instructor course and fixed a number of bugs and got the USB keyboard @arkadiusz.makarenko firmware working.
Dont have a soldering iron with me here down in the south of england so cant fix my sound.
———
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
Re: TFMSX rev1
@terriblefire nice to see you’ve made some good progress on this.
The TFMSX is definitely on my wish list when you’re ready to release or share .
The TFMSX is definitely on my wish list when you’re ready to release or share .
If it ain't broke, test it to Destruction.