New arrival :)

[mgi]

So this little fellow just arrived thanks to Phil.

20250225_141036.jpg (467.18 KiB) Viewed 249 times

It must be good since it was made in Scotland?

20250225_143059.jpg (272.68 KiB) Viewed 249 times

Now I need to buy 1MB memory card, 1MB flash card, Z88 serial link and start playing with it.

Cheers
Michal

[rubber_jonnie]

Nice

[PhilC]

Glad you like it @mgi

You can do a hardware mod where you can change the internal ram and rom chips. Might save you from trying to get the expensive cards?

[alexh]

Interesting I don't have one of those

[Icky]

Does it have the upgraded RAM and ROM with latest OS?

That is a project if you are looking to expand this little gem. viewtopic.php?p=108390#p108390

[mgi]

Thanks, will look into it!

You can get now 1MB RAM card with latest OS and 1 MB Flash card instead to EPROM. These should provide plenty enough and allow to keep internals untouched.

Does anyone have any experience with programming on z88 in assembler? I can happily execute code in C using z88dk, Forth using CamelForth plus there is BBC Basic but I struggle to execute BIN files compiled with z80asm or mpm.

Cheers
M

[mgi]

So the little fellow has now the latest system, is communicating via RS232 and I can play games

Screenshot_20250312_202711_Gallery.jpg (69.86 KiB) Viewed 116 times

I also got this one and will try to run CP/M on it - right now works as a Unix terminal for RS6000.

20250312_154629.jpg (224.31 KiB) Viewed 116 times

Only issue is the floppy not working so needs looking into.

Cheers
M

[PhilC]

Wow, never thought you could play manic miner on a Z88

[mgi]

You can play lemmings too

[rubber_jonnie]

I have an NC200 as well

I would suggest that you need to replace the FDD drive belt unless already done. My FDD didn't work until I did so and the belt was in a terrible state.

They make a good serial terminal BTW