I have one of these, branded Duratool, and aside from the original gun having a heater fail (A new gun was about £23) it's been solid. Proper maintenance is the key though, I always check it's clear and empty it regularly.
If you use flux a lot, something like RMA-218 which is a gel type flux, then the filters need to be checked and changed regularly, but they are cheap and easy to change.
You will not be able to post if you are still using Microsoft email addresses such as Hotmail etc
See here for more information viewtopic.php?f=20&t=7296
See here for more information viewtopic.php?f=20&t=7296
Desoldering Station ZD-915
-
rubber_jonnie
- Site Admin
- Posts: 12559
- Joined: Thu Aug 17, 2017 7:40 pm
- Location: Essex
- Contact:
Re: Desoldering Station ZD-915
Collector of many retro things!
800XL and 65XE both with Ultimate1MB,VBXL/XE & PokeyMax, SIDE3, SDrive Max, 2x 1010 cassette, 2x 1050 one with Happy mod, 3x 2600 Jr, 7800 and Lynx II
Approx 20 STs, including a 520 STM, 520 STFMs, 3x Mega ST, MSTE & 2x 32 Mhz boosted STEs
Plus the rest, totalling around 50 machines including a QL, 3x BBC Model B, Electron, Spectrums, ZX81 etc...
800XL and 65XE both with Ultimate1MB,VBXL/XE & PokeyMax, SIDE3, SDrive Max, 2x 1010 cassette, 2x 1050 one with Happy mod, 3x 2600 Jr, 7800 and Lynx II
Approx 20 STs, including a 520 STM, 520 STFMs, 3x Mega ST, MSTE & 2x 32 Mhz boosted STEs
Plus the rest, totalling around 50 machines including a QL, 3x BBC Model B, Electron, Spectrums, ZX81 etc...