Acer KA242Y: pretty nice!

All information relating to connecting your ST to a modern TV/monitor.
User avatar
stween
Site sponsor
Site sponsor
Posts: 258
Joined: Sat Sep 08, 2018 3:10 pm
Location: Brooklyn & Edinburgh

Re: Acer KA242Y: pretty nice!

Post by stween »

ijor wrote: Thu Nov 21, 2024 10:43 pm
stephen_usher wrote: Thu Nov 21, 2024 10:39 pm I don't know. I don't have an ST -> VGA cable to try it.
Ah, you tested it only with a Falcon. But I understand @stween tested it with a STE, right? Or this monitor was tested with Falcon only so far?
Yes, I tested STE low/med/high resolutions, and then a bunch of Falcon resolutions. It handled the low/med resolutions great but ST high not so well (see first couple of posts in thread).
User avatar
stephen_usher
Site sponsor
Site sponsor
Posts: 6338
Joined: Mon Nov 13, 2017 7:19 pm
Location: Oxford, UK.
Contact:

Re: Acer KA242Y: pretty nice!

Post by stephen_usher »

Not surprising as ST-High is very out there when it comes to timing. The pixel clock is nowhere near the VGA one, so it's not surprising that it couldn't sync properly. The same symptom as on the Amiga.
Intro retro computers since before they were retro...
ZX81->Spectrum->Memotech MTX->Sinclair QL->520STM->BBC Micro->TT030->PCs & Sun Workstations.
Added code to the MiNT kernel (still there the last time I checked) + put together MiNTOS.
Collection now with added Macs, Amigas, Suns and Acorns.
Post Reply

Return to “DISPLAYS & CONVERTERS”