7406 and Floppy Fix
Posted: Wed Jun 22, 2022 4:56 pm
From what I've attempted to glean from photos, here is a sketch.
Could someone verify this?
Besides the 10kSil added to the WD1772, when adding resistors to fix floppy performance; on the 7406, there should be five 100k resistors wired from the pins coloured red in the drawing, (2,4,6,8,10) all terminating together at pin14.
Is this the correct ?
Could someone verify this?
Besides the 10kSil added to the WD1772, when adding resistors to fix floppy performance; on the 7406, there should be five 100k resistors wired from the pins coloured red in the drawing, (2,4,6,8,10) all terminating together at pin14.
Is this the correct ?