Xilinx programming cable USB -- anyone got this one?

General discussions or ideas about hardware.
User avatar
frank.lukas
Posts: 660
Joined: Fri Jan 19, 2018 11:52 am

Re: Xilinx programming cable USB -- anyone got this one?

Post by frank.lukas »

Badwolf wrote: Wed May 25, 2022 9:28 pm What is your USB VID/PID pair now?
... the same as before!

usb_xilinx.jpg
usb_xilinx.jpg (123.27 KiB) Viewed 985 times
User avatar
Badwolf
Posts: 2230
Joined: Tue Nov 19, 2019 12:09 pm

Re: Xilinx programming cable USB -- anyone got this one?

Post by Badwolf »

frank.lukas wrote: Thu May 26, 2022 10:44 am
Badwolf wrote: Wed May 25, 2022 9:28 pm What is your USB VID/PID pair now?
... the same as before!
That's a shame. I was hoping if it had now been programmed by Impact it could be used with xc3prog. Never mind, if you have a working setup, we can at least try things. :-)

BW
DFB1 Open source 50MHz 030 and TT-RAM accelerator for the Falcon
DSTB1 Open source 16Mhz 68k and AltRAM accelerator for the ST
Smalliermouse ST-optimised USB mouse adapter based on SmallyMouse2
FrontBench The Frontier: Elite 2 intro as a benchmark
User avatar
frank.lukas
Posts: 660
Joined: Fri Jan 19, 2018 11:52 am

Re: Xilinx programming cable USB -- anyone got this one?

Post by frank.lukas »

Someone over the Atari-home forum told me the driver is "xpc" but it not work correct with xc3sprog. Same can you read at the web.

Impact works fine ...

Xilinx_Suite.jpg
Xilinx_Suite.jpg (131.68 KiB) Viewed 958 times
Steve
Posts: 2570
Joined: Fri Sep 15, 2017 11:49 am

Re: Xilinx programming cable USB -- anyone got this one?

Post by Steve »

Hi Frank,

I believe your TT ram problem might only require re-flowing the solder on your ram chips and ram buffer chips.

I finished building a DFB1 today and it would not detect the ram even though I thought it was soldered perfectly. I put flux over and re-flowed and now it is all working.

PXL_20220530_142956767.MP.jpg
PXL_20220530_142956767.MP.jpg (491.41 KiB) Viewed 913 times
PXL_20220530_142727237.jpg
PXL_20220530_142727237.jpg (437.36 KiB) Viewed 913 times
PXL_20220530_142724182.jpg
PXL_20220530_142724182.jpg (612.97 KiB) Viewed 913 times
User avatar
Badwolf
Posts: 2230
Joined: Tue Nov 19, 2019 12:09 pm

Re: Xilinx programming cable USB -- anyone got this one?

Post by Badwolf »

Steve wrote: Mon May 30, 2022 3:45 pm Hi Frank,

I believe your TT ram problem might only require re-flowing the solder on your ram chips and ram buffer chips.
Great to see another board firing on all cylinders, Steve!

I'm starting to wonder if @frank.lukas's problem is indeed a solder joint or similar that's vibrated loose in shipping as there does seem to be a time (which to me impies heat) dependence to it.

It's all very odd.

Hopefully we'll get there.

BW
DFB1 Open source 50MHz 030 and TT-RAM accelerator for the Falcon
DSTB1 Open source 16Mhz 68k and AltRAM accelerator for the ST
Smalliermouse ST-optimised USB mouse adapter based on SmallyMouse2
FrontBench The Frontier: Elite 2 intro as a benchmark
Post Reply

Return to “HARDWARE DISCUSSIONS”