A visually impaired duo - VIC-20 and Atari 600XL

Blogs & guides and tales of woo by forum members.
User avatar
rubber_jonnie
Site Admin
Site Admin
Posts: 10472
Joined: Thu Aug 17, 2017 7:40 pm
Location: Essex
Contact:

Re: A visually impaired duo - VIC-20 and Atari 600XL

Post by rubber_jonnie »

@stephen_usher

Looking at the VBXL it seems to have its own on board crystals, which got me wondering "if I disconnect the 3.5Mhz crytsal, will it still work".

So I lifted a leg on the crystal, and lo and behold, I have a bright, shimmer free picture. If I touched the leg of the crystal on the pad, the shimmer comes back.

So, I don't know if the 3.5Mhz oscillator circuit is required, but I do now know it's the culprit. I have some new transistors, and will replace them one at a time to see if I can cure it, but very happy I now know 100% that it's that oscillator circuit.

I dare say it isn't needed since the VBXL now drives the video out, but it'd be nice to fix it at least.

I'm just running a quick 'burn in' test to make sure that the problem doesn't return, but so far so good.


:girldance:
Collector of many retro things!
800XL and 65XE both with Ultimate1MB,VBXL/XE & PokeyMax, SIDE3, SDrive Max, 2x 1010 cassette, 2x 1050 one with Happy mod, 3x 2600 Jr, 7800 and Lynx II
Approx 20 STs, including a 520 STM, 520 STFMs, 3x Mega ST, MSTE & 2x 32 Mhz boosted STEs
Plus the rest, totalling around 50 machines including a QL, 3x BBC Model B, Electron, Spectrums, ZX81 etc...
User avatar
stephen_usher
Posts: 5580
Joined: Mon Nov 13, 2017 7:19 pm
Location: Oxford, UK.
Contact:

Re: A visually impaired duo - VIC-20 and Atari 600XL

Post by stephen_usher »

Excellent news! :-)
Intro retro computers since before they were retro...
ZX81->Spectrum->Memotech MTX->Sinclair QL->520STM->BBC Micro->TT030->PCs & Sun Workstations.
Added code to the MiNT kernel (still there the last time I checked) + put together MiNTOS.
Collection now with added Macs, Amigas, Suns and Acorns.
User avatar
rubber_jonnie
Site Admin
Site Admin
Posts: 10472
Joined: Thu Aug 17, 2017 7:40 pm
Location: Essex
Contact:

Re: A visually impaired duo - VIC-20 and Atari 600XL

Post by rubber_jonnie »

stephen_usher wrote: Tue Apr 12, 2022 4:11 pm Excellent news! :-)
Certainly is, and having left it for 30 odd minutes there is no sign of the shimmer back at all. I will try replacing the transistors to see if the circuit can be fixed.

The output from the 3.5Mhz oscillator circuit feeds the GTIA - this creates the TV picture, and since its output is no longer used as it is provided by the VBXL, it may well be safe to leave it disabled.
Collector of many retro things!
800XL and 65XE both with Ultimate1MB,VBXL/XE & PokeyMax, SIDE3, SDrive Max, 2x 1010 cassette, 2x 1050 one with Happy mod, 3x 2600 Jr, 7800 and Lynx II
Approx 20 STs, including a 520 STM, 520 STFMs, 3x Mega ST, MSTE & 2x 32 Mhz boosted STEs
Plus the rest, totalling around 50 machines including a QL, 3x BBC Model B, Electron, Spectrums, ZX81 etc...
User avatar
rubber_jonnie
Site Admin
Site Admin
Posts: 10472
Joined: Thu Aug 17, 2017 7:40 pm
Location: Essex
Contact:

Re: A visually impaired duo - VIC-20 and Atari 600XL

Post by rubber_jonnie »

Just tested the 80 column demo of The Last Word, which suffered terribly from the shimmer, and it is really sharp and clear now :)
Collector of many retro things!
800XL and 65XE both with Ultimate1MB,VBXL/XE & PokeyMax, SIDE3, SDrive Max, 2x 1010 cassette, 2x 1050 one with Happy mod, 3x 2600 Jr, 7800 and Lynx II
Approx 20 STs, including a 520 STM, 520 STFMs, 3x Mega ST, MSTE & 2x 32 Mhz boosted STEs
Plus the rest, totalling around 50 machines including a QL, 3x BBC Model B, Electron, Spectrums, ZX81 etc...
User avatar
rubber_jonnie
Site Admin
Site Admin
Posts: 10472
Joined: Thu Aug 17, 2017 7:40 pm
Location: Essex
Contact:

Re: A visually impaired duo - VIC-20 and Atari 600XL

Post by rubber_jonnie »

Still no damn VIC chip Meh!!!

:(
Collector of many retro things!
800XL and 65XE both with Ultimate1MB,VBXL/XE & PokeyMax, SIDE3, SDrive Max, 2x 1010 cassette, 2x 1050 one with Happy mod, 3x 2600 Jr, 7800 and Lynx II
Approx 20 STs, including a 520 STM, 520 STFMs, 3x Mega ST, MSTE & 2x 32 Mhz boosted STEs
Plus the rest, totalling around 50 machines including a QL, 3x BBC Model B, Electron, Spectrums, ZX81 etc...
User avatar
rubber_jonnie
Site Admin
Site Admin
Posts: 10472
Joined: Thu Aug 17, 2017 7:40 pm
Location: Essex
Contact:

Re: A visually impaired duo - VIC-20 and Atari 600XL

Post by rubber_jonnie »

Ok, so it seems this is the problem.

The old video circuit has a 3.5ish Mhz oscillator circuit, which is now surplus to requirements with the VBXL installed.

The VBXL takes a 3.5ish Mhz clock from pin 3 of U24, a 74LS74.

When the old oscillator circuit is running, there are harmonics present on the signal from the 74LS74 which cause the shimmer. Removing the crystal from the old oscillator circuit prevents it running and stops the harmonics.

There is a however though.

The VBXL instructions are only for the 800XL and there are subtle differences I missed.

Firstly, Q8 and R110 are removed on the 800XL and this DISABLES the 3.5Mhz oscillator circuit. The 600XL on the other hand does the same with Q2 and R49. The 600XL has got a Q8 and it seems to be in the video circuit, but it's not right in this scenario, so I actually removed the wrong parts, and that left the old oscillator circuit running when it shouldn't have been, hence the harmonics.

So a combination of no 600XL specific instructions and a misread of the schematics led to the old oscillator left running.

I'll replace the current lashed up test setup as soon as I get time later in the week, but I am at least there now.

I just ran the full Numen demo and it worked 100% fine, so very happy with the results!!
Collector of many retro things!
800XL and 65XE both with Ultimate1MB,VBXL/XE & PokeyMax, SIDE3, SDrive Max, 2x 1010 cassette, 2x 1050 one with Happy mod, 3x 2600 Jr, 7800 and Lynx II
Approx 20 STs, including a 520 STM, 520 STFMs, 3x Mega ST, MSTE & 2x 32 Mhz boosted STEs
Plus the rest, totalling around 50 machines including a QL, 3x BBC Model B, Electron, Spectrums, ZX81 etc...
User avatar
stephen_usher
Posts: 5580
Joined: Mon Nov 13, 2017 7:19 pm
Location: Oxford, UK.
Contact:

Re: A visually impaired duo - VIC-20 and Atari 600XL

Post by stephen_usher »

At least you found the underlying issue. :dualthumbup:
Intro retro computers since before they were retro...
ZX81->Spectrum->Memotech MTX->Sinclair QL->520STM->BBC Micro->TT030->PCs & Sun Workstations.
Added code to the MiNT kernel (still there the last time I checked) + put together MiNTOS.
Collection now with added Macs, Amigas, Suns and Acorns.
User avatar
rubber_jonnie
Site Admin
Site Admin
Posts: 10472
Joined: Thu Aug 17, 2017 7:40 pm
Location: Essex
Contact:

Re: A visually impaired duo - VIC-20 and Atari 600XL

Post by rubber_jonnie »

stephen_usher wrote: Wed Apr 13, 2022 9:21 am At least you found the underlying issue. :dualthumbup:
Indeed, very happy to have got there in the end 😁
Collector of many retro things!
800XL and 65XE both with Ultimate1MB,VBXL/XE & PokeyMax, SIDE3, SDrive Max, 2x 1010 cassette, 2x 1050 one with Happy mod, 3x 2600 Jr, 7800 and Lynx II
Approx 20 STs, including a 520 STM, 520 STFMs, 3x Mega ST, MSTE & 2x 32 Mhz boosted STEs
Plus the rest, totalling around 50 machines including a QL, 3x BBC Model B, Electron, Spectrums, ZX81 etc...
User avatar
rubber_jonnie
Site Admin
Site Admin
Posts: 10472
Joined: Thu Aug 17, 2017 7:40 pm
Location: Essex
Contact:

Re: A visually impaired duo - VIC-20 and Atari 600XL

Post by rubber_jonnie »

The 600XL living its best life:

PXL_20220416_130334543.jpg
PXL_20220416_130334543.jpg (231.21 KiB) Viewed 1412 times

Ultimate 1MB, VBXL and SIDE3 and stereo Pokeymax.

Still nothing for the Vic though 😕
Collector of many retro things!
800XL and 65XE both with Ultimate1MB,VBXL/XE & PokeyMax, SIDE3, SDrive Max, 2x 1010 cassette, 2x 1050 one with Happy mod, 3x 2600 Jr, 7800 and Lynx II
Approx 20 STs, including a 520 STM, 520 STFMs, 3x Mega ST, MSTE & 2x 32 Mhz boosted STEs
Plus the rest, totalling around 50 machines including a QL, 3x BBC Model B, Electron, Spectrums, ZX81 etc...
User avatar
stephen_usher
Posts: 5580
Joined: Mon Nov 13, 2017 7:19 pm
Location: Oxford, UK.
Contact:

Re: A visually impaired duo - VIC-20 and Atari 600XL

Post by stephen_usher »

:dualthumbup:

Well, it's a bank holiday weekend so I wouldn't expect any deliveries of VIC chips or anything else.

Talking about clocks... Have you checked the clock inputs on the VIC-20's VIC chip socket?

C35 is used to tune the oscillation, then it uses UB9 (7402) for the main clock,plus UB10 (74LS74) as a clock divider.

R7 and R32 control the bias on the composite video output.
Intro retro computers since before they were retro...
ZX81->Spectrum->Memotech MTX->Sinclair QL->520STM->BBC Micro->TT030->PCs & Sun Workstations.
Added code to the MiNT kernel (still there the last time I checked) + put together MiNTOS.
Collection now with added Macs, Amigas, Suns and Acorns.
Post Reply

Return to “MEMBER BLOGS”