Page 1 of 306

exxos blog - random goings on

Posted: Mon Apr 15, 2019 8:51 pm
by exxos
I thought I would start my own little blog here. Not everything I do fits in the news section, or hardware section or anything. So things here are just general things which are going on in no particular order :)

I'll start off with this RAM fault on a STFM board. It was a 1MB machine, isolating the upper bank did not solve the problem. So the fault was in the lower bank somewhere.

IMG_4008.JPG
IMG_4008.JPG (101.35 KiB) Viewed 36118 times
IMG_4011.JPG
IMG_4011.JPG (178.08 KiB) Viewed 36118 times


Rather than mess about, I put my pre-heater to work and removed all the chips.

IMG_4012.JPG
IMG_4012.JPG (161.45 KiB) Viewed 36118 times

Then I stole the 4MB board From my test machine and soldered that in :)

IMG_4014.JPG
IMG_4014.JPG (142.09 KiB) Viewed 36118 times

So now the machine is running YAART (1MB only) .

Why am I repairing the board you may ask ? Over the past few weeks I have been buying and doing swaps for various junk including some motherboards. This STFM style of board is my favourite style so I just did not want to scrap this board. Some boards I really cannot be bothered to repair them, so they will be robbed of parts for my store eventually.

I do not actually have a working assembled STFM anymore :( myself and my girlfriend were playing games on it a few years ago, but it had the video sync problem so it came back home was taken to bits, and was just left that way :( I have no idea what happened to the motherboard or anything. So likely I will do some random bits and bobs to this board over time so I can actually build myself a complete STFM.

Primarily this will likely be a games machine. So likely I will add IDE to it once all the work is finished :) I will likely add a high density floppy kit and build another power supply for it at some point. It needs other fixes like the floppy and DMA pullups adding etc as well. I will also add a TOS104 to it as well.

Re: exxos blog - random goings on

Posted: Mon Apr 15, 2019 8:56 pm
by PhilC
Its always the same, you never get time to work on your own computer etc.....

Re: exxos blog - random goings on

Posted: Mon Apr 15, 2019 9:00 pm
by exxos
PhilC wrote: Mon Apr 15, 2019 8:56 pm Its always the same, you never get time to work on your own computer etc.....
Yep :( I have actually had a really nice case and keyboard put aside for ages as well :roll:

Re: exxos blog - random goings on

Posted: Mon Apr 15, 2019 9:05 pm
by exxos
This is the second machine which I have mentioned before..

This one will be heading off my girlfriends when finished so she can test all 300 of the 1772 chips :twisted:

IMG_4015.JPG
IMG_4015.JPG (139.15 KiB) Viewed 36105 times

I have fitted one of my latest high-density floppy kits and hacked in a ZIF socket to make it easy to swap chips. As it is now in the way of the floppy drive, I had to extend that cable.

Currently this machine is being used to test the SMT GLUE & MMU adapter boards. Also the new RTC board. I want to have a go at doing a 3-D printer case for this, but again time is always against me :(

IMG_4016.JPG
IMG_4016.JPG (117.42 KiB) Viewed 36105 times

Re: exxos blog - random goings on

Posted: Mon Apr 15, 2019 9:13 pm
by terriblefire
You actually use retro computers? I seem to have got out of the habit.

Re: exxos blog - random goings on

Posted: Mon Apr 15, 2019 9:19 pm
by exxos
terriblefire wrote: Mon Apr 15, 2019 9:13 pm You actually use retro computers? I seem to have got out of the habit.
Not lately no, just to swamped with hardware stuff lately :( We completed Castlemaster last time the machine was working (maybe 4 years ago) , only took 25 years :twisted: We almost got off level 2 of magic pockets as well... Still trying to get off level 1 on xenon..

I was playing with my 2600 recently, until I took it to bits to add Svideo mod, and got side-tracked.. need to finish that off aswell yet :roll:

Re: exxos blog - random goings on

Posted: Mon Apr 15, 2019 10:12 pm
by exxos
Got me a reel of 44 & 68 SMT sockets 8-)

IMG_4018.JPG
IMG_4018.JPG (68.82 KiB) Viewed 36082 times

Re: exxos blog - random goings on

Posted: Mon Apr 15, 2019 10:22 pm
by PhilC
exxos wrote: Mon Apr 15, 2019 10:12 pm Got me a reel of 44 & 68 SMT sockets 8-)


IMG_4018.JPG
Mongrel board perhaps?

Re: exxos blog - random goings on

Posted: Mon Apr 15, 2019 10:27 pm
by exxos
PhilC wrote: Mon Apr 15, 2019 10:22 pm Mongrel board perhaps?
Nope, DUALTOS boards mostly for the 44pin... 68pin maybe for future IDE boards.

Re: exxos blog - random goings on

Posted: Mon Apr 15, 2019 11:29 pm
by exxos
Bottom section test of the RTC case.. in theory the PCB should fit snug into the area.. unlikely.. but looks good either way :lol:

#MASTEROFBOXES

rtcc.JPG
rtcc.JPG (62.59 KiB) Viewed 36065 times