TOS206 ST DECODER BOARD - 68K type

Upgrade or replace the ROM.
Locked
User avatar
exxos
Site Admin
Site Admin
Posts: 23499
Joined: Wed Aug 16, 2017 11:19 pm
Location: UK
Contact:

TOS206 ST DECODER BOARD - 68K type

Post by exxos »

V1_PCB.jpg
V1_PCB.jpg (236.57 KiB) Viewed 3654 times

A compact TOS104 / TOS206 decoder board which can plug(or solder) into any existing 68000 socket. It also has the ability to have a socket on top for a CPU or accelerator.

REVISION 1- First prototype production run which has TOS decoding only (the PCB will mention 16MHz but it is not included on that version)


FITTING to H4 MOTHERBOARD

The decoder board will work in any of the H4's expansion sockets.

Solder a wire ( if not already fitted ) to the CE pad near the top left of the board.

V1.JPG
V1.JPG (159.42 KiB) Viewed 3654 times

On the H4 remove JP13 Jumper and connect the other end of the CE wire to the right pin.
(Removing this jumper isolates the GLUE's ROM CS signal from the ROM so we can drive it from the decoder board instead)

IMG_5148.JPG
IMG_5148.JPG (297.15 KiB) Viewed 3654 times

Assuming you have already a DUALTOS ROM fitted to the H4, you can select bank 1 or 2 by removing or fitting JP1.

IMG_5149.JPG
IMG_5149.JPG (302.07 KiB) Viewed 3654 times


68K SOCKET USAGE (H4 & ORIGINAL ST MACHINES)
v1socket.jpg
v1socket.jpg (150.85 KiB) Viewed 3654 times
A DIP 68000 be used in the socket for original or H4 motherboards. The socket can also be used to plug in accelerators or boosters. The decoder board also correctly handles the bus grant logic for accelerators.



FITTING TO ORIGINAL ST MACHINES.

While the socket can still be used as stated above, if no accelerator or other add-ons are to be used, it is recommended that the CPU be soldered directly onto the decoder board because there is some height restrictions on various STF machines

Also note that using original machines you will also need a DUALTOS ADAPTER. Wire CE wire from the decoder board solders to the CE pad on the DUALTOS board.

NOTE - I only produce DUALTOS adapter boards which will fit the 70789 style boards and MEGA ST.


LINKS

STORE LINK
https://www.exxosforum.co.uk/atari/store2/#0172

DUALTOS ROM (104 & 206)
https://www.exxosforum.co.uk/atari/store2/#0054

STFM 70789 DUALTOS ADAPTER
https://www.exxosforum.co.uk/atari/store2/#0131

MEGA ST DUALTOS ADAPTER.
https://www.exxosforum.co.uk/atari/store2/#0008
https://www.exxosforum.co.uk/atari/ All my hardware guides - mods - games - STOS
https://www.exxosforum.co.uk/atari/store2/ - All my hardware mods for sale - Please help support by making a purchase.
viewtopic.php?f=17&t=1585 Have you done the Mandatory Fixes ?
Just because a lot of people agree on something, doesn't make it a fact. ~exxos ~
People should find solutions to problems, not find problems with solutions.
Locked

Return to “ROM UPGRADES”