Sharp X68000 Screen Prompt

[RetroTec]

Hi does anyone know what this prompt means, trying to load space harrier, it starts loading and then stops with this message prompt

sharp.JPG (40.46 KiB) Viewed 575 times

Using a 1MB ACE X68000 with a Gotek attached using an .hfe disk image

[Higgy]

'Papago' is a really useful App (not sure if on Apple Store) it seems to have a better conversion for Japanese than say Google Translate.

Pretty sure I ran Space Harrier on 1mb as someone at a retro show commented about not having a chequered floor and that was when I had no memory upgrade.

Alot of issues are due to SRAM not being set/saved.
Load MasterDisk V2 and type switch.x if you have not done this already.
Memory should be set to 1mb, you need to press Escape then Save.

[RetroTec]

Thanks again for the assistance, not yet used switch utility so will try that I forgot there is no bios like a normal pc its in sram settings, I have no backup battery yet got to solder in my nimh replacement, luckily I removed the original nicad just in time before it caused any damage

[Dlfrsilver]

Hi does anyone know what this prompt means, trying to load space harrier, it starts loading and then stops with this message prompt

sharp.JPGUsing a 1MB ACE X68000 with a Gotek attached using an .hfe disk image

This message indicates a program error with SR = $2700:PC = $00FF1B0A

Retry / Ignore / cancel

[HigashiJun]

Hi does anyone know what this prompt means, trying to load space harrier, it starts loading and then stops with this message prompt

sharp.JPGUsing a 1MB ACE X68000 with a Gotek attached using an .hfe disk image

This message indicates a program error with SR = $2700:PC = $00FF1B0A

Retry / Ignore / cancel

Precisely, it should read:

An address error has occurred (SR=$2700:PC=$00FF1B0A)

Cancel <A> Retry < > Ignore < > ?