EDIT: found the PRG !
- IMG_4530.JPG (57.06 KiB) Viewed 124 times
and....
- IMG_4531.JPG (67.39 KiB) Viewed 122 times
- IMG_4533.JPG (117.03 KiB) Viewed 114 times
Now where's my 16mhz booster....
You will not be able to post if you are still using Microsoft email addresses such as Hotmail etc
See here for more information viewtopic.php?f=20&t=7296
See here for more information viewtopic.php?f=20&t=7296
DO NOT USE MOBILE / CGNAT DEVICES WHERE THE IP CHANGES CONSTANTLY!
At this time, it is unfortunately not possible to whitelist users when your IP changes constantly.
You may inadvertently get banned because a previous attack may have used the IP you are now on.
So I suggest people only use fixed IP address devices until I can think of a solution for this problem!
At this time, it is unfortunately not possible to whitelist users when your IP changes constantly.
You may inadvertently get banned because a previous attack may have used the IP you are now on.
So I suggest people only use fixed IP address devices until I can think of a solution for this problem!
Please make sure you are logged in for at least 2 hours
to make sure your IP is added into the firewall whitelist, thanks
to make sure your IP is added into the firewall whitelist, thanks
Flashy Clock - Yet another DEV board
Re: Flashy Clock - Yet another DEV board
Actually ... @Icky looking back a few posts here viewtopic.php?p=84668#p84668 you did the alt-ram driver ?
EDIT: found the PRG !
and....
Now where's my 16mhz booster....
EDIT: found the PRG !
and....
Now where's my 16mhz booster....
Re: Flashy Clock - Yet another DEV board
Cool... I think I registered interest in one of these way back so would be great to actually get one!
Re: Flashy Clock - Yet another DEV board
Oh good. You had me racking my brain as I didn't remember it!exxos wrote: Mon Feb 02, 2026 9:04 pm Actually ... @Icky looking back a few posts here viewtopic.php?p=84668#p84668 you did the alt-ram driver ?
EDIT: found the PRG !
BW
DFB1 Open source 50MHz 030 and TT-RAM accelerator for the Falcon
Smalliermouse ST-optimised USB mouse adapter based on SmallyMouse2
FrontBench The Frontier: Elite 2 intro as a benchmark
Smalliermouse ST-optimised USB mouse adapter based on SmallyMouse2
FrontBench The Frontier: Elite 2 intro as a benchmark
Re: Flashy Clock - Yet another DEV board
Was trying yesterday to give the clock running at 16mhz.. But ended up with odd issues like this..
I also think there is a missing pull-up on the 16mhz booster causing floppy issues. This was even more problematical because it seems the ZIF socket I had in my H5 for testing 1772 chips was also causing floppy issues
so I should probably look for a better ZIF socket...
Next problem is the JTAG adapter which @Icky somehow lite up bright orange when I think I plugged it in wrong.. Looks like a track got a tad on the warm side..
So while I was at my girlfriends today, doing the monthly ASDA shop... I was stood there staring into space, as one does in such situations, and some something struck me.. ( no it wasn't my girlfriend throwing a tin of beans at me for not paying attention and putting it in the trolley ).. I realised I had some logic which would work fine at 8mhz but not 16mhz.. I'm not sure why that logic was there, but it was slowing down the flashyclock bus enable buffers
so anyway.. we now running 16mhz !
- IMG_4538.JPG (49.02 KiB) Viewed 63 times
I also think there is a missing pull-up on the 16mhz booster causing floppy issues. This was even more problematical because it seems the ZIF socket I had in my H5 for testing 1772 chips was also causing floppy issues
so I should probably look for a better ZIF socket...Next problem is the JTAG adapter which @Icky somehow lite up bright orange when I think I plugged it in wrong.. Looks like a track got a tad on the warm side..
- IMG_4535.JPG (153.9 KiB) Viewed 63 times
So while I was at my girlfriends today, doing the monthly ASDA shop... I was stood there staring into space, as one does in such situations, and some something struck me.. ( no it wasn't my girlfriend throwing a tin of beans at me for not paying attention and putting it in the trolley ).. I realised I had some logic which would work fine at 8mhz but not 16mhz.. I'm not sure why that logic was there, but it was slowing down the flashyclock bus enable buffers
so anyway.. we now running 16mhz !- IMG_4539.JPG (362.94 KiB) Viewed 63 times
- IMG_4540.JPG (350.57 KiB) Viewed 63 times
Re: Flashy Clock - Yet another DEV board
First test run. Simple program which gets the RTC time & date. This will be used to set the system time as control panel won't be compatible with the RTC.
- IMG_4584.JPG (53.3 KiB) Viewed 18 times
Re: Flashy Clock - Yet another DEV board
Plugging that non-keyed JTAG connector is my worst nightmare! I always fear I am plugging it the wrong way. I keep a couple of pictures with the right orientation to be sureexxos wrote: Wed Feb 04, 2026 7:38 pm Next problem is the JTAG adapter which @Icky somehow lite up bright orange when I think I plugged it in wrong.. Looks like a track got a tad on the warm side..
http://github.com/ijor/fx68k 68000 cycle exact FPGA core
FX CAST Cycle Accurate Atari ST core
http://pasti.fxatari.com
FX CAST Cycle Accurate Atari ST core
http://pasti.fxatari.com
Re: Flashy Clock - Yet another DEV board
Yeah I took some pictures as well nowijor wrote: Mon Feb 09, 2026 2:21 pm Plugging that non-keyed JTAG connector is my worst nightmare! I always fear I am plugging it the wrong way. I keep a couple of pictures with the right orientation to be sure