You will not be able to post if you are still using Microsoft email addresses such as Hotmail etc
See here for more information viewtopic.php?f=20&t=7296
See here for more information viewtopic.php?f=20&t=7296
BOOKMARK THIS PAGE !
https://www.exxosforum.co.uk:8085/IP_CHECK/
You can unban yourself if needed. It also sends me reports to investigate the ban.
https://www.exxosforum.co.uk:8085/IP_CHECK/
You can unban yourself if needed. It also sends me reports to investigate the ban.
DO NOT USE MOBILE / CGNAT DEVICES WHERE THE IP CHANGES CONSTANTLY!
At this time, it is unfortunately not possible to whitelist users when your IP changes constantly.
You may inadvertently get banned because a previous attack may have used the IP you are now on.
So I suggest people only use fixed IP address devices until I can think of a solution for this problem!
At this time, it is unfortunately not possible to whitelist users when your IP changes constantly.
You may inadvertently get banned because a previous attack may have used the IP you are now on.
So I suggest people only use fixed IP address devices until I can think of a solution for this problem!
Phoenix Case Badge
-
Icky
- Site Admin
- Posts: 4286
- Joined: 03 Sep 2017 10:57
- Location: UK
Phoenix Case Badge
If anyone is wanting to create a case badge for their Phoenix Platform H4/5 case we have been rendering a badge as part of the STFM Case Remake to fit. Although we have used a x at the end of the ST part of the badge for now. We are looking to change to represent the motherboards being used such as H for the H series.
Below is the STL file if you want to have a go at 3D printing out and painting with appropriate rainbow colours (ROYGBIV) for each letter of the Phoenix word. Suggest you use very fine detail in your slicer such as 0.1mm layers height etc.
This was my initial attempt at printing in white so its got a bit grubby with all the handling.
If anyone would like to have a go at this including the painting and show us the results it would be great. I know that @PhilC is looking to create one.
You do not have the required permissions to view the files attached to this post.
-
PhilC
- Moderator
- Posts: 7312
- Joined: 23 Mar 2018 20:22
Re: Phoenix Case Badge
@Icky ive 3d printed a couple, just need to paint them. Hardest part was getting the printer to print them nicely.
If it ain't broke, test it to Destruction.
-
exxos
- Site Admin
- Posts: 27969
- Joined: 16 Aug 2017 23:19
- Location: UK
Re: Phoenix Case Badge
Need a 3D printer with multiple heads for the colours hmm...
-
derkom
- Moderator
- Posts: 1230
- Joined: 29 Jul 2018 18:45
Re: Phoenix Case Badge
Another option is something like a Mosaic Palette 3 Pro. I've never used such a device myself, but ran into it when researching dual extruder printers a while back.
-
officer960
- Posts: 67
- Joined: 22 Jul 2018 21:42
Re: Phoenix Case Badge
You do not have the required permissions to view the files attached to this post.
H5C1, H5C5B, 1040 ST, Mega ST, STe, Mega STe, Falcon, TT030, Amiga 2k V2+, Amiga 2k Video Toaster GVP030, Amiga 500, Amiga 500+ V2, Amiga 500+ Firebird V4, Amiga 1200 PiStorm, FPGA: V4SA, MiST, MiSTer, UnAmiga, U64 Elite
-
exxos
- Site Admin
- Posts: 27969
- Joined: 16 Aug 2017 23:19
- Location: UK
Re: Phoenix Case Badge
:bravo:
-
sporniket
- Site sponsor
- Posts: 1159
- Joined: 26 Sep 2020 21:12
- Location: France
-
Icky
- Site Admin
- Posts: 4286
- Joined: 03 Sep 2017 10:57
- Location: UK
Re: Phoenix Case Badge
Nice to see the badge on a machine
-
JezC
- Posts: 2754
- Joined: 28 Aug 2017 23:44
Re: Phoenix Case Badge
It'd be even better if we could see the board underneath the top case as well ;)
Who is online
Users browsing this forum: CCBot, Icky, LarryL and 4 guests