DoG's H5 B1 Build

Share your building progress here!
User avatar
DoG
Posts: 1125
Joined: Sat Apr 07, 2018 12:26 pm

Re: DoG's H5 B1 Build

Post by DoG »

exxos wrote: Thu Jan 14, 2021 3:14 pm
DoG wrote: Thu Jan 14, 2021 3:10 pm The recapped PSU I have been using (for over 1,5 years) put out 5.5V and that is not fine for the H5.
Odd.. But yeah 5.5V is a bit high anyway. Is your 70859 board using 2.2K bus resistors or the original ones ?
Hmm. I think I have changed them. But not 2.2K. It think it got 3.3K on address- and 4.7K on data bus.
User avatar
DoG
Posts: 1125
Joined: Sat Apr 07, 2018 12:26 pm

Re: DoG's H5 B1 Build

Post by DoG »

I did a recap on another PSU but I remember that that one got hooked up to some large resistors and got adjusted when I first turned it on. I think it was used for the H4.
User avatar
exxos
Site Admin
Site Admin
Posts: 23498
Joined: Wed Aug 16, 2017 11:19 pm
Location: UK
Contact:

Re: DoG's H5 B1 Build

Post by exxos »

DoG wrote: Thu Jan 14, 2021 3:24 pm Hmm. I think I have changed them. But not 2.2K. It think it got 3.3K on address- and 4.7K on data bus.
It might be why then.. I'm moving to 2.2K, they were 4.7K on the H5 series.. probably somethings just oscillating more at the higher voltage causing it not to boot. I think I had one of the remake boards running at 7V before :twisted: :twisted:
https://www.exxosforum.co.uk/atari/ All my hardware guides - mods - games - STOS
https://www.exxosforum.co.uk/atari/store2/ - All my hardware mods for sale - Please help support by making a purchase.
viewtopic.php?f=17&t=1585 Have you done the Mandatory Fixes ?
Just because a lot of people agree on something, doesn't make it a fact. ~exxos ~
People should find solutions to problems, not find problems with solutions.
Post Reply

Return to “H5 B1 USER BUILDS”