Search found 17056 matches
- Mon Jan 21, 2019 9:09 pm
- Forum: HARDWARE ISSUES
- Topic: STFM Booster 2.3 + Dual TOS Kit, TOS 2.06 Issue
- Replies: 50
- Views: 23805
Re: STFM Booster 2.3 + Dual TOS Kit, TOS 2.06 Issue
No, TOS206 never worked (not with 16MHz and also not with 8MHz -> same behaviour) Ah ok, that makes a lot more sense then.. I thought you had it running with TOS206 at 8MHz... Should I run something or just the desktop? Its probably not worth it I think now... 16MHz is working with TOS104, so eithe...
- Mon Jan 21, 2019 8:37 pm
- Forum: HARDWARE ISSUES
- Topic: STFM Booster 2.3 + Dual TOS Kit, TOS 2.06 Issue
- Replies: 50
- Views: 23805
Re: STFM Booster 2.3 + Dual TOS Kit, TOS 2.06 Issue
Very strange...
I don't see how TOS104 works at 16MHz but not TOS206. Its like TOS206 ROM is corrupted, but you said it works at 8MHz ?
Can you boot TOS104 and run GB6 for a couple hours and see if TOS104 is stable at 16MHz..
http://www.exxosforum.co.uk/atari/last/GB6/index.htm
I don't see how TOS104 works at 16MHz but not TOS206. Its like TOS206 ROM is corrupted, but you said it works at 8MHz ?
Can you boot TOS104 and run GB6 for a couple hours and see if TOS104 is stable at 16MHz..
http://www.exxosforum.co.uk/atari/last/GB6/index.htm
- Mon Jan 21, 2019 2:43 pm
- Forum: HARDWARE ISSUES
- Topic: STFM Booster 2.3 + Dual TOS Kit, TOS 2.06 Issue
- Replies: 50
- Views: 23805
Re: STFM Booster 2.3 + Dual TOS Kit, TOS 2.06 Issue
Can you also post close up shot of the ROM board also...
- Mon Jan 21, 2019 2:15 pm
- Forum: HARDWARE ISSUES
- Topic: STFM Booster 2.3 + Dual TOS Kit, TOS 2.06 Issue
- Replies: 50
- Views: 23805
Re: STFM Booster 2.3 + Dual TOS Kit, TOS 2.06 Issue
Thanks.. It looks like the yellow line is the booster pin 1 ? The signal doesn't look as good as it should be. I suggest you put a 68R in series with the wire going to pin 39 of the shifter... try again... if still problems, add another 68 and try again... Also have you tried a different floppy driv...
- Mon Jan 21, 2019 1:23 pm
- Forum: HARDWARE ISSUES
- Topic: STFM Booster 2.3 + Dual TOS Kit, TOS 2.06 Issue
- Replies: 50
- Views: 23805
Re: STFM Booster 2.3 + Dual TOS Kit, TOS 2.06 Issue
You haven't read my post fully as I asked for 2 readings... https://www.exxosforum.co.uk/forum/viewt ... 068#p17044
- Mon Jan 21, 2019 10:31 am
- Forum: FPGA DEVELOPMENT
- Topic: Project: HDMI/DVI out for STFM
- Replies: 666
- Views: 320706
Re: Project: HDMI/DVI out for STFM
Icky, where did you get up to ?
Are you at a point to send me a not working setup ?
Are you at a point to send me a not working setup ?
- Mon Jan 21, 2019 10:21 am
- Forum: HARDWARE ISSUES
- Topic: STFM Booster 2.3 + Dual TOS Kit, TOS 2.06 Issue
- Replies: 50
- Views: 23805
Re: STFM Booster 2.3 + Dual TOS Kit, TOS 2.06 Issue
Where are you measuring it ?
- Sun Jan 20, 2019 10:59 pm
- Forum: SEC 64MHZ BOOSTER
- Topic: CURRENT PROTOTYPE STATUS (SEC 64MHz 68000)
- Replies: 601
- Views: 263326
Re: V2.5 BOOSTER CURRENT PROTOTYPE STATUS (SEC BOOSTER)
I will do my tests with a Lattice CPLD, where I have all tools (compiler, programmer) available. Unfortunately not pin compatible, so it will need some extra wiring.. I can send you a PCB.. but I think trying to force wire a different PLD would require much more effort than just creating a new PCB ...
- Sun Jan 20, 2019 10:05 pm
- Forum: HARDWARE ISSUES
- Topic: STFM Booster 2.3 + Dual TOS Kit, TOS 2.06 Issue
- Replies: 50
- Views: 23805
Re: STFM Booster 2.3 + Dual TOS Kit, TOS 2.06 Issue
Also, what floppy drive are you using exactly ? and have you tried a different one ?
Also when it bombs, what happens if you press reset on the back of the ST, does it bomb again ?
Also when it bombs, what happens if you press reset on the back of the ST, does it bomb again ?
- Sun Jan 20, 2019 9:32 pm
- Forum: HARDWARE ISSUES
- Topic: Damage done to my STE
- Replies: 50
- Views: 20875