                   .:                     :,                                          
,:::::::: ::`      :::                   :::                                          
,:::::::: ::`      :::                   :::                                          
.,,:::,,, ::`.:,   ... .. .:,     .:. ..`... ..`   ..   .:,    .. ::  .::,     .:,`   
   ,::    :::::::  ::, :::::::  `:::::::.,:: :::  ::: .::::::  ::::: ::::::  .::::::  
   ,::    :::::::: ::, :::::::: ::::::::.,:: :::  ::: :::,:::, ::::: ::::::, :::::::: 
   ,::    :::  ::: ::, :::  :::`::.  :::.,::  ::,`::`:::   ::: :::  `::,`   :::   ::: 
   ,::    ::.  ::: ::, ::`  :::.::    ::.,::  :::::: ::::::::: ::`   :::::: ::::::::: 
   ,::    ::.  ::: ::, ::`  :::.::    ::.,::  .::::: ::::::::: ::`    ::::::::::::::: 
   ,::    ::.  ::: ::, ::`  ::: ::: `:::.,::   ::::  :::`  ,,, ::`  .::  :::.::.  ,,, 
   ,::    ::.  ::: ::, ::`  ::: ::::::::.,::   ::::   :::::::` ::`   ::::::: :::::::. 
   ,::    ::.  ::: ::, ::`  :::  :::::::`,::    ::.    :::::`  ::`   ::::::   :::::.  
                                ::,  ,::                               ``             
                                ::::::::                                              
                                 ::::::                                               
                                  `,,`


https://www.thingiverse.com/thing:2602482
Power Supply Case by keithellis is licensed under the Creative Commons - Attribution license.
http://creativecommons.org/licenses/by/3.0/

# Summary

So there are a few options to build this.  I laser cut the front and back panels from 3mm acrylic, but I have also provided the STL along with the DXF files so you can print if you like.

I then 3D printed the top and intended to print the bottom which included the sides, i.e. the files

* top.stl
* Base_with_sides.stl

However I printed the top section twice, not wanted to waste the print I divided up the base so the sides could be printed separately,

* side1.stl
* side2.stl

I then connected the parts together with 3mm machine screws.

Here re a few ebay links to get the components to build the whole power supply

* Power supply - Amazon http://amzn.to/2iuOsaW
* Power supply - ebay -http://www.ebay.co.uk/itm/DPS3003-DP20V2A-30V5A-50V5A-DC32V-3A-Programmable-Step-down-Power-Supply-Module/272718281609?ssPageName=STRK%3AMEBIDX%3AIT&var=571854069865&_trksid=p2057872.m2749.l2649
* Banana sockets - http://www.ebay.co.uk/itm/4-x-4mm-Banana-sockets-amplifier-terminal-binding-posts-plug-socket-connector/311659846874?ssPageName=STRK%3AMEBIDX%3AIT&_trksid=p2057872.m2749.l2649
* DC charger socket - http://www.ebay.co.uk/itm/2-1MM-X-5-5MM-PANEL-CHASSIS-MOUNT-DC-SOCKET-CHARGER-POWER-JACK-PLUG-SMALL/221446846939?ssPageName=STRK%3AMEBIDX%3AIT&var=520317970798&_trksid=p2057872.m2749.l2649
* Power switch - http://www.ebay.co.uk/itm/Toggle-Rocker-Switch-SPST-250v-AC-20A-12v-24v-DC-16A-UK-Seller/152677506781?ssPageName=STRK%3AMEBIDX%3AIT&var=452244986181&_trksid=p2057872.m2749.l2649